Group behavior
 
Notifications
Clear all

Group behavior

5 Posts
3 Users
0 Reactions
2,151 Views
Posts: 5
 gma
Topic starter
(@gma)
Active Member
Joined: 11 years ago
[#40002]

I'm using groups for a logically associated (by location) set of single color spots. Two are green and two are blue. When I assign a color to any of the spots, all spots in that group receive the same color. Is this expected behavior or a bug? If it's expected, could someone explain the intended use of groups?


4 Replies
jeffu231
Posts: 2456
(@jeffu231)
Famed Member
Joined: 15 years ago

Can you provide some screen shots as to how you have it setup? The expanded group in display setup and in the editor how you applied the effect.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Yes this is expected. When a group contains items of multiple color types, you can put any kind of color on the group. However if you've configured the color for the elements properly, only the elements that support the color used will actually use that color. Take this screenshot for example:

Capture

This is blue a pulse effect placed on my minitree group. The garden trees have no blue. Those are just Red and White. But the Driveway trees are RGBW so the blue works on those. The Driveway Tree snowflakes are full mixing RGB.

Now if I were to put white on this group, you'll see that even though the RGB snowflakes don't have a white component, It does put white on those elements. Since they are full mixing RGB, and can produce white, it's a viable color for those elements.


Reply
Posts: 5
 gma
Topic starter
(@gma)
Active Member
Joined: 11 years ago

Sorry I wasn't more clear...this is in the display setup.

VixenGroup1

BUT - I just tried this this with 3.2u2 it won't reproduce. I had originally created this error with a build from the dev code downloaded last week, but I'm not a location I can try it again until tomorrow. I will try it and report back. Oops - need to check GA operation before posting! Thanks for the reply.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Sometimes when changing the color type of an existing element, you have to exit all the way out of vixen before it takes effect. I've been trying to figure out the exact pattern but it seems to be somewhat random.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Share: