controller/element ...
 
Notifications
Clear all

controller/element channels assignments?

3 Posts
2 Users
0 Reactions
1,664 Views
Posts: 50
Topic starter
(@tombmatt)
Trusted Member
Joined: 18 years ago
[#34708]

Okay, have a zues 16 and a zues 8 running off a etherdongle using E1.31. controlling a megatree with 24 strings with 50 nodes on each string for 150 channels on each string. if I select the megatree and the sacne1.31 controller and let it rip it assigns 3600 channels. I have a usb pro in front of the etherdongle it takes the first 512 channels. the E1.31 starts on channel 513. however it assigns all the channels on the mega tree with no breaks, should not there be breaks at the end or each group of three string (450 channels) leave 62 blank channels and then jump to the next universe? I thought that you can't span universes with string assignments? I ask because I have exported to fpp and I have lost a string of data and I think it is due to trying to span universes with strings?

so does vix 3 span universes or do I need to leave the channels blank to not span universes??????


2 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I'm having a difficult time following your thought process. But yes vixen will span universes. If you have universe 1 end at 510 and universe 2 starts at 511, your channels will patch straight thru. There's no need for skipping channels.
If you need it to match the way your controller is set up, then you need to go thru and make sure they're matched. Since you have the fpp in the mix too, all 3 need to match.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 50
Topic starter
(@tombmatt)
Trusted Member
Joined: 18 years ago

thanks that is what I thought was happening.


Reply
Share: