Notifications
Clear all

VLC Plugin

8 Posts
4 Users
0 Reactions
5,328 Views
Posts: 69
Topic starter
(@jduawa)
Trusted Member
Joined: 16 years ago
[#20985]

Here is my attempt at a Vixen 2.1.1 plugin to be used with VLC to trigger a video within a sequence.

VLC allows you to start it with an http interface. This plugin takes advantage of that by sending http commands to the host pc that is running VLC.

You will need to create a VLC playlist to use this plugin. The first item in the playlist should be the file black.wmv or you can use your own video clip that will be "paused" when play of other clips is stopped.

To configure the plugin the user can enter the VLC host address, VLC host port and then needs to import a playlist.
In the attached image, I have black.wmv as the first item and set its trigger (start) @ 1 and stop @ 101. In my sequence the first timeslot is where i set the intensity to 1 to bring up VLC with a paused black screen.
the start and stop triggers are set for the remaining videos. I used higher number so that on the timeline of the sequence i can see where a video is going to start or stop.
If you tell a video to play but do not tell it to stop then the playlist will continue in order.

vlc plugin

The channel combo box is telling vixen what channel to listen for trigger events for the video

Here is the bat file i used to start vlc with the http interface and a playlist. You need to supply vlc the same playlist you opened in vixen

c:\progra~1\VideoLAN\VLC\vlc --intf http --extraint dummy --dummy-quiet test2.xspf

The source and dll can be found @
https://github.com/jduawa/Vixen-VLC-PLugin

again this is my first attempt so it is probably a bit buggy...

These videos really helped

to understand plugin development.

Hopefully this can be of use to someone


7 Replies
Posts: 14
 DanS
(@dans)
Eminent Member
Joined: 17 years ago

This sounds like a good solution for my first video attempt. I will be trying it out in a week or so. Thank you!


Reply
Posts: 69
Topic starter
(@jduawa)
Trusted Member
Joined: 16 years ago

You may want to look @ http://www.videolan.org/doc/play-howto/en/ch04.html , to add options to your batch file. One option you will probably want to add is to launch in fullscreen(--fullscreen or -f) and to turn off title on screen display (--no-video-title-show)


Reply
Posts: 69
Topic starter
(@jduawa)
Trusted Member
Joined: 16 years ago

Fixed a couple bugs so i suggest getting the newest dll from github
Thanks


Reply
Posts: 368
(@henkvis)
Honorable Member
Joined: 18 years ago

Hey,

Is it possible with this plugin, to launch video from your show computer? What I read from the story below, is that you need a different computer to run your video? Am i right? Or is it also possible to run this directly from the computer running Vixen.

Can you supply a small 'video for dummies' walkthrough how to setup this nice plugin?

thanks


Reply
Page 1 / 2
Share: