ElfPreview Output P...
 
Notifications
Clear all

ElfPreview Output PlugIn (new)

94 Posts
17 Users
0 Reactions
65.9 K Views
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

Never mind. I was running the latest but then I decided to just re-install everything and that cleared my problem right up.

JasonPortwood wrote:I'm testing Vixen+ with the elf plugin. When I try and play a sequence I get an error saying

---
Elf Preview:

(Router - Startup)
Exception has been thrown by the target of an invocation.
---

Any ideas why I get this?

Thanks,

Jason


Reply
MacabreRob
Posts: 215
Topic starter
(@macabrerob)
Reputable Member
Joined: 15 years ago

That was easy!


Reply
Posts: 225
 amps
(@amps)
Reputable Member
Joined: 15 years ago

First, I love this. Made my setup time for 2013 super easy. Took only an hour to do 160 channels!

Second, I have a problem with reordering lights. I setup all my channels, did the previews for each and was good. Then I decided to use some unsused channels from the bottom of my channel order to expand my mega tree from 12 to 16. When I change the display order in my profile so that the 4 extra channels are now with the rest of the megatree, everything is fine. However, when I reorder the outputs (since the 16 channels are gonna sit on the same controller), it offsets all the channels in Elf and pushes the preview art down to the wrong channels.

Not sure if this is fixable or if there's a workaround.

Thanks!


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Remember, this is beta software. Always backup before you make changes! Simply goto the profiles directory, hold down the the control key and drag and drop your profile to make a copy.

Your data is not gone, just in the wrong order.

There's no tutorials on fixing a profile. You could upload your profile and either I or someone else could edit it. You could probably recreate it faster though.

Sent from my DROID RAZR using Tapatalk 4


Reply
Posts: 225
 amps
(@amps)
Reputable Member
Joined: 15 years ago

Got tons of backups. Actually, the problem isn't with it messing up the profile. If I change the output order back to how it was, the preview lines back up. Seems that the channels in the preview are derived from the channel output order but the art doesn't actually follow the outputs when they get moved.

Example:

Channel 1 - Red
Channel 2 - Blue
Channel 3 - Green

If I add another channel, "channel Extra" and change the order so its:

Channel Extra
Channel 1
Channel 2
Channel 3

The data in the preview gets all confused. It still shows the original order, but looses the data from Channel 1.

Definetily gonna keep using it and just reorder before pushing my final sequences to xLights. Just thought I would mention it.

Thanks again.


Reply
Page 8 / 19
Share: