Vixen Compatible DC...
 
Notifications
Clear all

Vixen Compatible DC Controller

8 Posts
5 Users
0 Reactions
4,812 Views
Posts: 13
Topic starter
(@wseay)
Active Member
Joined: 19 years ago
[#1985]

I have a LOR DC card that I use to control a Talking Buck Head and Santa. But as the show expands, I need to stretch the budget more.

What options are there for DC control with Vixen?


7 Replies
Posts: 274
 Matt
(@matt)
Reputable Member
Joined: 19 years ago

I believe there is a way to make a Renard controller work with PWM to dim DC, by changing a setting in the firmware and using power transistors or MOSFET's. Control on the Vixen end would function the same as normal - just specify an intensity.

-Matt


Reply
Posts: 150
(@alwysrit2)
Estimable Member
Joined: 19 years ago

Depending on what you are doing, you can use a 595. I have used the 5v and 12v straight from the 595 to motors and lights without any issue. You can add relays if you are looking for more voltage. Another sollution is to use a k8055 or k74 for about $40 for 8 channels.


Reply
Posts: 13
Topic starter
(@wseay)
Active Member
Joined: 19 years ago

I would like to create a serial network so that I could run less cable around the display.

Is there a serial version of the 595? I have a K108 that I will probably have to create a driver for.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

What, no singing bass?

--

Phil


Reply
Page 1 / 2
Share: