milliseconds Questi...
 
Notifications
Clear all

milliseconds Question

9 Posts
5 Users
0 Reactions
2,965 Views
Posts: 81
Topic starter
(@djl7780)
Estimable Member
Joined: 16 years ago
[#13276]

Hello All,
I am new here as this is my first year doing animation and using Vixen. I have opened a sequence created by someone else, and would like to view the timing? Is their a way to view what Milliseconds their sequence is using? Would like to know so when using the copy/paste feature into my sequence they are both the same.
Thanks in advance!
Dustin


8 Replies
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
djl7780 wrote:Hello All,
I am new here as this is my first year doing animation and using Vixen. I have opened a sequence created by someone else, and would like to view the timing? Is their a way to view what Milliseconds their sequence is using? Would like to know so when using the copy/paste feature into my sequence they are both the same.
Thanks in advance!
Dustin

Click on Sequence->Settings on the menu bar and the event period will indicate the timing.

Welcome to DIYC!


Reply
Posts: 81
Topic starter
(@djl7780)
Estimable Member
Joined: 16 years ago

thank you so much!


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

You can also view the sequence file in Notepad. The timing is listed in the forth line.


Reply
Posts: 16
(@welderson)
Active Member
Joined: 17 years ago

I have another question about milliseconds. I have also opened someone else sequence and their timing was 10ms, but if I try to create a sequence with 10ms I get a message that says
"while possible, event periods less than 25ms aren't realistic or practical"
so I click "ok". then it creates the sequence at 100ms? Any help would be appreciated.

Rich


Reply
Page 1 / 2
Share: