Im gonna swap the hardware out later, it just doesnt make sense. I took my software backup which has worked all year up until a week or so ago, copied my sequences in. Left everything else the same but it was a backup which hasnt been used since first of november so I consider that the same as redoing everything right? Well, out of 5 tests, it worked 1. It is almost as if the hardware is sleeping as 1 other time (excluded from the above totals) I bumped the mouse about 15 seconds after it should have started and all of a sudden boom...it took off. Im gonna swap the computer out tonight. The PC is in my garage and it is COLD in there...down to the low 30's at least so maybe the hardware took a hit...I dont get it.
Computer is not is Sleep is it? May not wake up from sleep mode.
I have windows xp set to be always on and hard disks and monitor to never turn off. Its like it does though. Stinks, I just dont get it. Before I do this, Im going to go into the bios and check but I dont understand how it would have ran good all this time and now will not and it be a setting such as sleep in the bios.
swapped hardware, same thing, redid the program with a fresh download and the same thing. What I realized is it worked the first time that day but didnt after that. IF a timer runs once in a day and I back time up, will it run on its on again??? What Im afraid has happened is the day we lost power I tested it and it seems that most days it failed, I had tested it that day and NOT rebooted. So it screwed up and I tested it the next day and boom. I dont remember fully, but Im starting to get the feeling this may be user induced which PI$$es me off if thats the case.
Let me fully detail what I am doing just to clarify. Tonight I have a timer that runs from 5:00 to 5:27 and then the show kicks off at 5:30. I would back the timer to say 5:24 and manually restart timers. The timer would end at 5:27 and the first time I tried it it the show kicked off as planned at 5:30. So I repeated the procedure by resetting time to 5:24 and the timer ended at 5:27 but nothing at 5:30. Hope that makes sense.
Can someone confirm IF you run a timer once that day and back time up, will it run again on its own? I swear in 2.5.0.8 it did but I am running 2.1.4.0 and it seems that it knows it has ran that day. Advice?
I just cant afford with this little an amt of time left to have days the show doesnt run. Plus I wont be around some of the nights so I have to depend on it and cant!! Any help anyone can provide would be great, you guys have always came through for me.
I'm in a similar boat. My show computer was running fine, then last night the show didn't come on. I had to select restart current timers and then it worked fine. I hope it comes on tonight.

