Vixen - Adjustable ...
 
Notifications
Clear all

Vixen - Adjustable Preview Issue(?)

10 Posts
8 Users
0 Reactions
3,205 Views
Posts: 2
Topic starter
(@tylerpoz)
New Member
Joined: 13 years ago
[#25832]

Hey everyone -

My name is Tyler. I'm 14 years old and going into my freshman year of high school this coming semester. Since high-school is too jam-packed with a whole bunch of fun stuff... *cough cough* sarcasm... I've already started sequencing as a result and have been for about a week or so now. I've already finished 2 sequences and I'm half way through my third one. But here's a question for you all... I'm having this issue in only my sequences that are programmed at 50 milliseconds (a flash every 20th of a second). When I program my lights to flash consistently every other millisecond and view it in adjustable preview, it comes out all choppy and slow. I didn't have this problem last year when sequencing. I am working with 48 channels. Last year I worked with 24. I am afraid that my show is going to look how it does now with all the choppiness come December. I use two Renard SS24's, my laptop is a Dell Latitude D610, and my baud rates are at 57600. If anyone can help me with this, please do!

Thanks,

~ Tyler :spox:


9 Replies
milk86
Posts: 247
(@milk86)
Reputable Member
Joined: 14 years ago

Pentium M 760 (2.00Ghz w/ 533Mhz FSB)
512MB (2x256) PC3200-DDR2 (400Mhz)

are the specs in the system now?

might also look at things in the startup up if you use this for more than lights only. I am just thinking if other softwares might bog it down.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I had one of those laptops for a work computer and I remember it was a bit finicky.

• First, check and see if last year’s sequences still run OK.
• Make sure it’s not running any antivirus software. These tend to hog the CPU and/or harddrive.
• Never run Vixen from a USB memory stick. USB seemed to be a time sink on that machine.
• Turn off preview and see if the jerkiness goes away. If so, see if there is an update to the Windows video driver. Video speed is critical to Vixen. Slow video access will slow down turning pixels on and off.
• If you’ve never updated the system BIOS, go out to Dell’s website and get the latest. These updates also include the BIOS on the video controller. This may also speed up other functions in the system.

Let us know what you did to fix this. It may help someone else.


Reply
MacabreRob
Posts: 215
(@macabrerob)
Reputable Member
Joined: 15 years ago

Are you using the original Adjustable Preview plugin or the newer one released last year?


Reply
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

I would also recommend a few things to tune them up.

1. Run the disk clean up utility to remove old files that aren't needed.

2. Double check the amount of virtual memory that you have set. For performance I set it to be the same number for minimum and maximum size. So like if you had 1GB of real memory I set it to 2048GB both min and max. This way the system isn't always adjusting the virtual space as it's set to a specific size. That speeds things up and helps to stop fragmentation to a degree depending on usage (if you're moving lots of files around).

3. Run a defrag on your system.

Those can give you a performance bump.
-
Jason


Reply
Page 1 / 2
Share: