so to start of i have a Toshiba and of course it has no serial ports so i was wondering do i need to get an adapter from vga to serial or usb to serial and also if i do how do i run that to my first board which is 50 ft away i do have cat5 cable so any help on this would be great
It really depends on the hardware you're using. Based upon that, you will probably want a USB to 485 dongle.
So with that connecter do I just add an extension from that
Yepp, and 50 feet is nothing when it comes to RS-485, it is a very forgiving protocol. You can have at least a thousand feet between the computer and your first controller
Again, it depends on the lighting controller you're using. Since this is a vixen sub-forum, you could be using Lynx, Renard, DMX, etc. protocol.
