Bug in "Random"
 
Notifications
Clear all

Bug in "Random"

7 Posts
3 Users
0 Reactions
15.8 K Views
BadWolf
Posts: 73
Topic starter
(@badwolf)
Trusted Member
Joined: 19 years ago
[#5823]

I'm using version 2.0.9.0. I tried reporting this at bugzilla.vixenlights.com, but I get a message: "Either no products have been defined to enter bugs against or you have not been given access to any."

But anyway, when I use the random function, it works as expected in the highlighted channels, but it also destroys the channels that would have been in the highlighted location had I not moved them around in the profile.

Hope that makes sense.

To get around this, I had to first copy the channels that get destroyed, then use the random, then paste the other channels back in.

This is very repeatable, and if someone wants my sequence where I discovered this bug, I will be glad to supply it. I can explain it better with the sequence because I can say use random "here" and watch what happens up "there."

Later. . . . . . Brad


6 Replies
toodle_pipsky
Posts: 1285
(@toodle-pipsky)
Noble Member
Joined: 19 years ago

I think I know what your talking about. I had something like that happen to me, I kinda wondered why whole sections were disappearing until I worked out it was when I highlighted a chunk to use a preset effect.

Now, this happened to me before I set up a profile so it was a stand alone sequence and I had re-ordered the channels. There's a thread about it somewhere - but if I recall someone said to open the VIX file in notepad (or just a plain text editor) and go to the channel output and put them back in numerical order. I'll try and find the thread . . . . .
I must admit that didn't work everything was still all screwy, so I had to abandon it, but it might work for you. After that I set up a profile and have reordered channels and haven't had a problem since.

Additional:
http://www.doityourselfchristmas.com/forums/showthread.php?t=4193 There you go. Hope this helps.


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago
BadWolf wrote:.....

but it also destroys the channels that would have been in the highlighted location had I not moved them around in the profile.

.....

These "moved" channels, how were they moved? Did you change the channel output or did you just reorder them for sequencing ease?


Reply
BadWolf
Posts: 73
Topic starter
(@badwolf)
Trusted Member
Joined: 19 years ago
toodle_pipsky wrote:I think I know what your talking about. I had something like that happen to me, I kinda wondered why whole sections were disappearing until I worked out it was when I highlighted a chunk to use a preset effect.

toodle_pipsky, I checked the link you provided and it does sound like the same problem. I saw that it was recommended that you edit your profile with wordpad, but I want (need actually) the order of channels the way that I set them up. When I set up my display, I plugged into the SSR's in whatever was the easiest way and used the fewest cords, knowing that I could reorder the channels in Vixen. For example, some of my arches aren't in a "natural" order, and it would be real hard to sequence them if I couldn't reorder the channels.

Later. . . . . . . .Brad


Reply
BadWolf
Posts: 73
Topic starter
(@badwolf)
Trusted Member
Joined: 19 years ago
Macrosill wrote:These "moved" channels, how were they moved? Did you change the channel output or did you just reorder them for sequencing ease?

Brian, I just reordered them for sequencing purposes. The way my display is set up, I really need to reorder them. Once I figured out what was happening, I could deal with it, but it would be handy if randomize wouldn't affect other channels. Since I don't have dimming, I don't know if it happens with other functions such as sparkle, etc.

Later. . . . .. Brad


Reply
Page 1 / 2
Share: