The Simpler Things
 
Notifications
Clear all

The Simpler Things

7 Posts
6 Users
0 Reactions
2,412 Views
Posts: 3735
Topic starter
(@algerdes)
Famed Member
Joined: 15 years ago
[#54334]

Yesterday a friend, who owns a business with a larger building standing out on its own (nothing within 200 yards), asked if I could light up his building.
He knew about all the "fancy stuff" I do, and wanted to see if I could put that knowledge to work on his corner of the world.

He wants to outline the building, which has several peaks and a good set of roof lines, some with some depth to them. His desire is to change the color of the outline, perhaps with a pattern (something like the bars effect, or a single strand) from time to time to match the holiday, and to make it look "real festive" during the Christmas holiday season.

At first I thought, sure. No problem. Several remote receivers, a Falcon F4V3, and quite a few pixels mounted in channels. He could run xLights to sequence, and let an FPP on an RPi be "the boss". Then it struck me that the "fancy stuff" we do on a regular basis was because of all the learning, testing, failing, succeeding, experience and friends we have in the DIYC community. He has none of that behind him. Trust me when I say that he is pretty well removed from the tech community. (He is a smart fellow, but his skillset includes pumps, chemicals, and grass.)

So, I started looking around for simple controllers with even simpler programs to run them. I came across a couple of videos on WLED. Now I'm beginning to wonder if this wouldn't be better for my friend as it is pretty simple from where I sit.

Does anyone have an opinion as to how to do this for him? It has to be simple, but still capable. It has to be inexpensive, or at least not cost an arm and a leg.

TIA


6 Replies
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago
algerdes wrote:Yesterday a friend, who owns a business with a larger building standing out on its own (nothing within 200 yards), asked if I could light up his building.
He knew about all the "fancy stuff" I do, and wanted to see if I could put that knowledge to work on his corner of the world.

He wants to outline the building, which has several peaks and a good set of roof lines, some with some depth to them. His desire is to change the color of the outline, perhaps with a pattern (something like the bars effect, or a single strand) from time to time to match the holiday, and to make it look "real festive" during the Christmas holiday season.

At first I thought, sure. No problem. Several remote receivers, a Falcon F4V3, and quite a few pixels mounted in channels. He could run xLights to sequence, and let an FPP on an RPi be "the boss". Then it struck me that the "fancy stuff" we do on a regular basis was because of all the learning, testing, failing, succeeding, experience and friends we have in the DIYC community. He has none of that behind him. Trust me when I say that he is pretty well removed from the tech community. (He is a smart fellow, but his skillset includes pumps, chemicals, and grass.)

So, I started looking around for simple controllers with even simpler programs to run them. I came across a couple of videos on WLED. Now I'm beginning to wonder if this wouldn't be better for my friend as it is pretty simple from where I sit.

Does anyone have an opinion as to how to do this for him? It has to be simple, but still capable. It has to be inexpensive, or at least not cost an arm and a leg.

TIA

So far for simple and economical the small controllers like pixel pop or pixel stick or wemos with wled is about the simplest I have personally tried ,other than just putting up some led strands . But I’m not the most experienced lol


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

+ 10 on WLED

I would suggest using Srg74's shield as your controller

Nothing compares to this shield as it accepts Wemos 8266 or 32 🙂


Reply
Posts: 451
(@utimgr)
Honorable Member
Joined: 14 years ago

Let me say this....you will probably be on the hook to help him out from this day forward, when something doesn't work or he wants something different. If you don't mind being "the guy" then proceed. I'm that guy for a local family fun center. It all started some 20+ years ago when I saw something that made me think...I can fix this, and I did. And now when he needs something (including the hot dog machine that needed a new switch on July 4th) I get the call. But I don't mind because I knew this going in and we have a good relationship. Thats just my experinace. And this is why I never tell the neighbors I can fix their computer because once you touch it, you hand is there forever. I send them to a guy I know that does it as his business.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Utimgr wrote:Let me say this....you will probably be on the hook to help him out from this day forward, when something doesn't work or he wants something different. If you don't mind being "the guy" then proceed. I'm that guy for a local family fun center. It all started some 20+ years ago when I saw something that made me think...I can fix this, and I did. And now when he needs something (including the hot dog machine that needed a new switch on July 4th) I get the call. But I don't mind because I knew this going in and we have a good relationship. Thats just my experinace. And this is why I never tell the neighbors I can fix their computer because once you touch it, you hand is there forever. I send them to a guy I know that does it as his business.

+10

I would point him in the direction of those who light commercial buildings for a living and count that as the best thing one could do for him.


Reply
Page 1 / 2
Share: