I had a sequence that (I added to the channels ) what the channels do and it works just fine on my work pc
but when I tryed it on my show pc it goes back to the old sequence profile.
Things I 've done
removed every thing from show pc (vixen seguences profiles audio) copyed from work pc (vixen sequences profiles audio ) and dowloaded to show and it still come's up the way it was before I did the changes.
Any suggestion would be greatly appreciated
show pc has frame works 2.0 and work pc has frame works 3.5sp1 could that make a differance?
Did you copy the Sequence and Profile from the Work computer? If not, you will need both. You actually add channels to the profile.
Edit: I see that you said you copied everything, but it sure doesn't sound like it. Ignore the Sequence for now and go to manage profiles and verify that the Channels are in fact in there.
On work PC just pick the Profile option flatten profile into sequence. Copy the sequence from the work PC to the home PC, open the sequence and then pick the create profile from sequence option. That will help sync the sequence and the profile between the two machines.
kychristmas wrote:Did you copy the Sequence and Profile from the Work computer? If not, you will need both. You actually add channels to the profile.Edit: I see that you said you copied everything, but it sure doesn't sound like it. Ignore the Sequence for now and go to manage profiles and verify that the Channels are in fact in there.
under manage profiles it does not have the new added channels or changed channels .
now what?
