i just got my center pole all welded for my mega tree and started on the "hoop" .
I read somewhere that the diameter of the hoop should be aprox the same as the height.
so my 17' tall tree "needs" a 50' circumference hoop. i put 5 sticks of conduit together and it looks huge, i reduced it by 10' sections and got down to 30' and i think that circ looks good, also at 30' with a 6" light spacing 60 channels is more reasonable to me.
am i nuts or will it look way too pointy?
also how do you guys ans gals get the conduit apart ( im using gray electrical conduit) once i put it together i had to ues a hammer to get the first connection apart?
thanks
scott
am i nuts or will it look way too pointy?
A Christmas tree is like a mans woman ... what looks good in the eye of the beholder is all that matters !
Next .. what I did for the grey electrical conduit was toss some vaseline on it before pushing together , and after putting them together , drilled a 3/16 hole thru where the one end ties into the other ( to form the circle ) and then tossed in a SS nut and bolt thru it to assure it staying together .
TERBObob wrote:A Christmas tree is like a mans woman ... what looks good in the eye of the beholder is all that matters !Next .. what I did for the grey electrical conduit was toss some vaseline on it before pushing together , and after putting them together , drilled a 3/16 hole thru where the one end ties into the other ( to form the circle ) and then tossed in a SS nut and bolt thru it to assure it staying together .
thank you for the vaseline advise---- i was thinking greese or oil but thought it would be too messy, then i thought of sanding the male end (insert joke here) to make it a loose fit.
Vas will be a much better idea
thanks again,
Scott
another question:
what do you guys who have 15 foot+ mega trees use for guy wires and how do yu attach them into the ground?
i was going to use 5/16 climbing rope (because i had it) and 20 inch long 1/2 dia rebar (because i had it also) well i just pounded one in the ground at a 45* angle adn put a rope on it and around my waist and leaned back adn it did not take a lot of effort to stand it up streight, does not give me a good feeling it will hold up to wind.
Will longer rebar solve my problem??
ANY HELP OUT THERE????
Thanks
scott
keep in mind i do not have the time to pour concrete however info on how to make concrete ancors will be helpful for next year.
gizmo wrote:i just got my center pole all welded for my mega tree and started on the "hoop" .I read somewhere that the diameter of the hoop should be aprox the same as the height.
so my 17' tall tree "needs" a 50' circumference hoop. i put 5 sticks of conduit together and it looks huge, i reduced it by 10' sections and got down to 30' and i think that circ looks good, also at 30' with a 6" light spacing 60 channels is more reasonable to me.am i nuts or will it look way too pointy?
also how do you guys ans gals get the conduit apart ( im using gray electrical conduit) once i put it together i had to ues a hammer to get the first connection apart?
thanks
scott
For some reason I had it in my head 1/2 the height. So I would make that 8.5' diameter or about 26.70' circumference. Which seems to be about where you ended up? I am just getting ready in the next few weeks to start buying all the parts for my ~12' tree.
--Greg
