MartinMueller2003 wrote:In general a rPI is a small Linux computer. The 400 is actually a modified rPI 4. It has the Ethernet and 5 USB ports exposed. Not sure how big the flash size is but it has everything you need to run a show (plus a moderately annoying keyboard). You can connect a USB based sound blaster audio adapter (or other type) to it and use the Ethernet port to drive the show.
That's what I was assuming when I purchased it. Some online posts I have read made it sound like the USB-based option does not work for some reason. Maybe I will just buy a Sound Blaster on Amazon and give it a try.
Glycerine wrote:Have you seen the DACBerry 400? I'm not using one, but it looks like it might "answer the mail"...
Yes, I have. That is my last option, I think. It definitely would work, but I am a bit put off by the cost of shipping, which is almost as much as the device. Still, I suppose beggars can't be choosers...
oyarsa wrote:By "Bluetooth it," what do you mean? Connect the Pi 400 via bluetooth to an audio source?
Yeah, you can connect it via Bluetooth to a Bluetooth speaker, and not have to buy any other special hardware. It's just I find your Pi 400 setup suboptimal, and mostly I think you're doing it because that is what you had available. I mean why buy other hardware if you're only going to switch it again later.
The reason other people don't do Bluetooth more often is because the audio playback's timing is not as tight with the lights. I'm not convinced that is too much of a concern for you. Just try the Bluetooth first, and if it doesn't work, what have you lost? You learned something.
oyarsa wrote:That's what I was assuming when I purchased it. Some online posts I have read made it sound like the USB-based option does not work for some reason. Maybe I will just buy a Sound Blaster on Amazon and give it a try.
I would try a USB soundblaster first. I don't see why it wouldn't work.
In the long run, are you trying to get a Pi 4 or Pi 3?
1pet2_9 wrote:Yeah, you can connect it via Bluetooth to a Bluetooth speaker, and not have to buy any other special hardware. It's just I find your Pi 400 setup suboptimal, and mostly I think you're doing it because that is what you had available. I mean why buy other hardware if you're only going to switch it again later.The reason other people don't do Bluetooth more often is because the audio playback's timing is not as tight with the lights. I'm not convinced that is too much of a concern for you. Just try the Bluetooth first, and if it doesn't work, what have you lost? You learned something.
Timing is definitely a concern for me. I'm a musician, so even if my show is small so far, it would drive me crazy if it wasn't synced right. And, I do use an FM transmitter. I'm sure I could find some way to connect the bluetooth to an FM transmitter, but that would probably compound the latency issues.
What do you consider suboptimal about using the Pi 400? You're right that I'm doing it because it is what was available, so you may be right. Other than the possible audio issue, it looked to be as good a setup as a Raspberry Pi 4. But, as I said, I know next to nothing about Raspberry Pis.
