Needed recommendati...
 
Notifications
Clear all

Needed recommendations on controllers

7 Posts
3 Users
0 Reactions
2,276 Views
Posts: 30
Topic starter
(@paul5cimn)
Trusted Member
Joined: 14 years ago
[#40292]

Back a few years ago I started to build a flashy, blinky setup for my kids in the front yard. I started by buying 4 Lynx Express and one Renard SSR24 as well as 30,000 LED lights. I had a lot of great ideas that had to be put on hold to complete a Master's degree and relatively large remodel on the house. I currently have 72 channels but want to add at least three arches and nine small trees to the display. What I am looking for is recommendations on expanding the system. Since I have the LEDs unopened in the garage, I will probably expand for next year without going to pixels. But what I am not sure of is the difference between the Renard SSR24 and TR24? Nor am I sure if either or both will work with the expanded Renards?

Any help would be appreciated. I am looking at purchasing the recommended systems once identified but also want to purchase one kit and see if I can actually put one together.

I appreciate any help offered!

Paul


6 Replies
jeffl
Posts: 250
(@jeffl)
Reputable Member
Joined: 18 years ago

Can't speak for the Renard equipment but adding Lynx Expresses to your current setup would work well and keep things the same.


Reply
Posts: 30
Topic starter
(@paul5cimn)
Trusted Member
Joined: 14 years ago

Having just got back on the site, I have not seen any discussions on the Lynx Expresses and was unsure if they were still available. The last item I got was the Renard SSR24 which worked fine with the Lynx boxes. However, a concern I have is how to set the first channel on the controllers. The Lynx Express seemed easy with a digital display...


Reply
jeffl
Posts: 250
(@jeffl)
Reputable Member
Joined: 18 years ago

Any Lynx Express boards would likely be pre-owned purchases unless it was a Minleon version.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
paul5cimn wrote:Having just got back on the site, I have not seen any discussions on the Lynx Expresses and was unsure if they were still available. The last item I got was the Renard SSR24 which worked fine with the Lynx boxes. However, a concern I have is how to set the first channel on the controllers. The Lynx Express seemed easy with a digital display...

Do you really have a need to set the first address? Renard are self-addressing by default but there are code versions (addressable and DMX) that support setting the address - albeit via programming the PIC. If you are looking for adding Lynx gear, you're probably better off hunting on the diylightanimation (DLA) forum vs here since this is primarily a Renard-ish forum (at least for AC/DC control).


Reply
Page 1 / 2
Share: