Need controllers su...
 
Notifications
Clear all

Need controllers suggestion

25 Posts
8 Users
3 Reactions
6,221 Views
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago
[#58701]

I'm looking for a complete controller setup for my co-worker. He wants a Mega tree pixels and leaping arch pixels to add to his traditional led lights. Preferably can be run without a computer. Open to do DIY or buy already built. Any suggestions will be greatly appreciated.Thanks!


24 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

There are some vendors that have mega tree kits that include a controller (like an F16) in a CG1500 (or similar) box with a PSU. My megatree has 1600 pixels so it uses two PSUs and an F16V3 controller. How many legs? How long? How Tall? Is there a topper of some sort? To be stand alone, just a a raspberry pi running FPP. Put a bunch of premade sequences on it and let it run.

I run my show with 5 raspberry PIs. Overkill caused by special conditions in my show that make it easier to plop down another PI instead of running lots of wire.


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago

Is the Mega tree 180 or 360 degrees? Legs? I don't know what this mean. Tall=12 - 20ft. Topper=yes. Any other hardware needed to run the F16V3?
Thaks!


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago

360 degrees Mega tree is preferred.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Legs means how many vertical strands. Mine has 16 legs in a 360 degree configuration. it uses 8 ports on my f16 and the other 8 are backup ports for my arches. All of my controllers are max 50% populated so that a failed controller can be replaced by nearby controllers easily.


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I have used thisline of DIY boards since the were made available. Most use a Beagle Bone Black (BBB) or a Pocket Beagle (PB) but not all. With Falcon Pie Player (FPP) installed on them they are self contained controller. If you go to the GitHub page you'll see all the different styles and varieties. I love building them and using them.


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago
rayhjr wrote:
I have used thisline of DIY boards since the were made available. Most use a Beagle Bone Black (BBB) or a Pocket Beagle (PB) but not all. With Falcon Pie Player (FPP) installed on them they are self contained controller. If you go to the GitHub page you'll see all the different styles and varieties. I love building them and using them.

I underestimated the DIY. With the amount of learning and work that need to be done, I don't think the time left before Christmas is enough. I think I'll go with something that is almost ready or ready to use. Thanks for the reply.


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago
MartinMueller2003 wrote:
Legs means how many vertical strands. Mine has 16 legs in a 360 degree configuration. it uses 8 ports on my f16 and the other 8 are backup ports for my arches. All of my controllers are max 50% populated so that a failed controller can be replaced by nearby controllers easily.

If only 8 ports are used, does it mean that 1 string (100 ct/string - 24ft length) of Led's is folded to make into 2 legs? I also assumed that the height of the Tree is around 10-12ft? Which pixel led did you use? or recommended? Thanks.


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago

Also, are there any sequences readily available, for purchase?


Reply
Posts: 29
Topic starter
(@salongaopm)
Eminent Member
Joined: 17 years ago

And what type of controller can be use with this to control traditional lights?


Reply
Page 1 / 3
Share: