Making the switch -...
 
Notifications
Clear all

Making the switch -- which controller to build?

18 Posts
10 Users
0 Reactions
7,608 Views
Posts: 4
Topic starter
(@dmorey)
Active Member
Joined: 18 years ago
[#11663]

I've been animating my lights with 48 channels of Animated Lighting controllers for about four years and syncing the lights through Maestro (i.e. Vixen.) I want to build my own controller but am unsure which to start with.

--I understand how the controllers work but am not that tech savvy so nothing terribly difficult, the simplier the better
--I will probably put up around 40,000 lights. About half, maybe more, are LED
--I want to start with at least 48 channels. I would prefer to go with 64. Open to even more.
--I am intrigued by DMX and would consider a DMX controller/adapter. I have two DMX snow machines I'd love to sync if it's feasible
--I want to be able to dim
--I will definitely use Vixen to sync so I don't lose sequences
--I own a AL Monster Brain and three AL controllers. Have a 485 converter and Cat 5s too. Two controllers are finicky and have channels that don't light. Should I cannibalize or use parts?
--Prefer to be somewhat quick and ready for Halloween
--Open costwise. Prefer to stay under $300 to start if that's feasible

Any suggestions? Any help is appreciated. I'm ready to order parts within the next week and get going. I've been thinking about DIY for two years and figure it's now or never. Thanks!

Deanna


17 Replies
Posts: 15
(@hbomb341)
Active Member
Joined: 18 years ago

I HIGHLY recommend the Lynx Express Controllers (~$68 Each - http://diylightanimation.com )

INFO: http://diylightanimation.com/wiki/index.php?title=Manual_Express

There is a CoOP ("Group Buy") open till the end of the month to get all the parts and PCB.

Harrison


Reply
Posts: 4
Topic starter
(@dmorey)
Active Member
Joined: 18 years ago

Thanks. That seems like a great idea. I believe this is the controller I saw RJ demo last summer but couldn't remember what it was called. Are these relatively easy to assemble?


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I second that


Reply
Posts: 15
(@hbomb341)
Active Member
Joined: 18 years ago
dmorey wrote:Thanks. That seems like a great idea. I believe this is the controller I saw RJ demo last summer but couldn't remember what it was called. Are these relatively easy to assemble?

I wouldn't say they are hard to but easy with a little skill.

Harrison


Reply
kwajtony
Posts: 118
(@kwajtony)
Estimable Member
Joined: 17 years ago

With a little practice soldering, the LE is probably one of the easiest controllers on the market, but since I've only built lynx equipment my opinion is probably not worth much. Most of the parts are not extremely sensative to heat and the board is good quality. Yes, you can make mistakes but they can be overcome unless you gouge holes in the board or something. An relatively inexpensive way to see is to build one of RJ's dongles, if that work out the LE would be a piece of cake. IMHO

R,
Tony "C"


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

Do you have a soldering station or a decent soldering iron? If not that will add around $50 to your start up cost. Don't forget to add the cost of enclosures to your bill unless you plan on keeping the boards in the house and using external SSRs or extension cords. (which can really add alot of expense if you need to buy more) Do you have a PIC programmer? or do you plan on asking someone to program the PICs for you? If the answer is 'No' to both questions then you will be down around another $50.

It looks like the cheapest solution would be to use a GRINCH + Ren-C combo but you could also get 2 Renard SS24s,(much more expensive mind you but may still be in your price range) you can see a comparison of DIY boards here although this list does not include the lynx system or the Ren48LSD.(The Ren48LSD does not use a zero cross signal so it must use the PWM firmware to dim, it's documentation also does not specify whether it can be used with external SSRs or not but you can ask the man who invented it, Budude.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
Jrd wrote: you can see a comparison of DIY boards here although this list does not include the lynx system or the Ren48LSD.(The Ren48LSD does not use a zero cross signal so it must use the PWM firmware to dim, it's documentation also does not specify whether it can be used with external SSRs or not but you can ask the man who invented it, Budude.

It does not support SSRs - I thought about it but the jumpering mechanism, while not hard to implement might have led to a lot of magic smoke being released so I left that option out. I'll update the Wiki however... (edit - Wiki updated)


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

Maybe you could add a question and answer to the faq on the Ren48LSD about SSRs.

And maybe you could also add the difficulty level of the Ren48LSD to the "Board Construction Difficulty" sectiond of the Comparison of DIY Boards page.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
Jrd wrote:Maybe you could add a question and answer to the faq on the Ren48LSD about SSRs.

And maybe you could also add the difficulty level of the Ren48LSD to the "Board Construction Difficulty" sectiond of the Comparison of DIY Boards page.

done

Q4: Can I use standard DIY SSRs with the Ren48LSD?
A4: Maybe - but with the following caveats:

  • It has not been tested at all
  • The power LED on the SSR will not work as there is no ground fed to pin 7.
  • To be safe, pins 3, 5 and 7 should not be connected from the Ren48LSD to the SSR.
  • You MUST use a 5vdc source only - using a higher voltage (say 12v) could (probably will) damage the optos on the SSRs (AC or DC).

For these reasons, it is not really recommended to use an SSR on the Ren48LSD.


Reply
Page 1 / 2
Share: