I'm trying to determine which enclosure to get. It will house the following:
- Falcon F16V2-R controller
- Raspberry Pi B+
- 2 600w Power Supplies (9.4 x 2.6 x 4.9 inches)
Also for wiring everything up, what gauge wire would be recommended? Thanks!
You can only get a F16 and one 350w PSU in a CG1500. So if you want all that in one enclosure, strike that one off your list. You are likely looking at a bud box. They are more expensive but bigger. Also means its harder to hide in the yard so there is give and take here.
See my boxes?
There are 2 CG1500's containing 3 360w/12v PSUs and an F16 there (one with F16+PSU, second with 2 PSUs). There is also a CG1000 containing an 8 port netgear switch, 12v>5v converter to power Raspi and FM, RasPi B2, FM transmitter and antenna.
I like distributed smaller boxes. But thats me. I think they are easier to hide in the yard. They are easier to mount, and easier to carry.
stallionent wrote:I used the Bud Industries boxes PI can go in the cover
Which model is that?
It is this one from Amazon. I use them also. There are also matching color vents available.
https://www.amazon.com/BUD-Industries-NBF-32026-Plastic-Economy/dp/B005T94MQU/ref=sr_1_1?ie=UTF8&qid=1480529556&sr=8-1&keywords=bud+32026
FYI, NBF-32026 is not outdoor rated according to Bud. Not saying yall aren't using them successfully oudoors, just saying Bud does not rate them for outdoor use for whatever reason.
http://www.budind.com/pdf/hb32026.pdf
NBF-32326 is rated for outdoor but very expensive. I use the cheap one 32026, no water yet. I also use the plastic plate for the 32026 + standoffs for the controller, just in case
NBF-32326 is. NBF-32026 is not. And the 32026 is what both of you linked to on Amazon which is why I brought up the non-outdoor rating.


