I'm new to light sequencing and I don't know how many channels to begin with and I am curious to know how many strings of lights can I put together as one channel? Also any information on beginning with light sequencing would be great.
First of all welcome. I started last year and used dumb rgb strips for four windows and white led lights on trees and dumb rgb floods for wall washing. It was a huge success. I ended up with about 80 channels and everyone that saw it loved it. I'm into pixels now and I'm over 1000 channels my second year. I would start small and get the hang of it then blowup next year.
Welcome
I suggest you look at the biginners section in the wiki. Lots of great information is located there. How many strings on a channel depends on how much current your SSR can provide and what type of bulb you are using. Incandescents use 4-5 times as much power as the same number of LEDs.
Martin
Thank you. Also I plan on using a 32 channel and I was wandering if I could use two 16 channel ssr'a instead of one expensive 32 channel ssr
Hmm. I think you need to look at the beginners guide for hardware selection. SSRs are more commonly coming in 1, 3, and 4 channel varieties. A device like the Renard SS24 has 24 one channel SSRs. Also, SSRs come in two main flavors (with many subtle variations) AC and DC. The type you use is driven by the type of lights you plan to use. My show has a mix of AC and DC SSRs. My personal choice has been the Renard 64x with 4 channel SSRs mounted near each element.
Martin
Okay I thought I needed a ssr for very channel and that they were separate from the Reynard board.
The RenardSS16 is a great starter board for the DIY'er - a couple of those and you've got the makings for a great show using the lights you probably already have. You can use Vixen 2 and get lots of free sequences that may or may not fit your particular setup but at least it's a start. You can get LOR or Vixen sequences and convert LOR to Vixen. It's a lot easier to use shared sequences when your channel count is smaller.
This may be helpful. This helped me a lot in my first year (which was last year). I constantly refer back to it.
ACL 101 manual
budude wrote:The RenardSS16 is a great starter board for the DIY'er - a couple of those and you've got the makings for a great show using the lights you probably already have. You can use Vixen 2 and get lots of free sequences that may or may not fit your particular setup but at least it's a start. You can get LOR or Vixen sequences and convert LOR to Vixen. It's a lot easier to use shared sequences when your channel count is smaller.
This is the best route for a beginner. Two controllers (instead of one) gives you some flexibility for placement and channel distribution without the use of extension cords. The wiki also has complete documentation for them.
Using Vixen 2 is also a great way as it is a seasoned software package. There are complete video tutorials for how to use it as well (once again, in the wiki). Also as mentioned, there are literally thousands of sequences out there for it for you to try and use if you need to, also making your own is part of the fun. 🙂
Welcome to DIYC! :thup:
