So i just cannot seem to find the info I am looking for and I'm very new to the lights so if someone could point me in the right direction or help me out, I would really appreciate it.
Here's what I am looking to do. I would like to operate a raspberry pi, running Falcon Pi Player, and say 50 - 100 pixel lights off a battery so I can attach to my son's Mardi Gras float (just a little wagon) for his school parade next year. I'm not even sure where to start with this other than I need some batteries and a way to hook them up to the pi and light controller. I was thinking maybe rechargeable batteries like you would use in RC cars perhaps? But how do i determine how many I need and I know nothing about these types of batteries, so are there different kinds or should I look at a different option?
Not a priority now, but what about something to hold all of this? I know i need to make sure it is vented properly as everything will be giving off heat but i want to make sure it is all closed up where the kids cannot touch any of the wiring.
I think I would use a 12V battery, (like a car battery, or a golf cart battery), or better yet, power it off of the 12v Source from what ever is powering the float.
The PI runs off of 5v, so, you will need a Buck converter to step from 12v to 5v for the PI. If you use 12V pixels, you can run them directly off of the 12 V battery with no step-down. If you are using 5v pixels, just power the lights and the PI off of the output of the buck converter.
Something like this:
http://www.amazon.com/Waterproof-Converter-Regulator-Adjuster-Surveillance/dp/B00CEP3A0Q/ref=sr_1_1?ie=UTF8&qid=1455568909&sr=8-1&keywords=5V+waterproof+buck+converter+50W
Doesn't take a great deal. Pi may be overkill unless that's what you are used to. Arduino, Teensy or other Atmel/Atmega based microprocessors is the way I would go (and have gone). Lots of Pixel Libraries and very low power requirements. Here are some options:
1. For Power, I ran 12V Pixels/Modules/Strips off of 9v battery, but with 100 Pixels you will need more. I powered the micro with same 9v with a Buck Converter to drop it down to 5v.
2. For 5v pixels already, then look at simply using an 6v SLA battery of appropriate size. You would be suprised just how long even an old Power Wheels SLA battery can power the pixels and micro.
3. Some of the larger Cell Phone Charger Packs that are out could easily run what you need for an hour or so. They usually have 2 or 3 USBs on them so you could use one for Micro, One for each 50ct Pixel.
4. On the high-end, I just ordered a couple of these Anker Car Jump Starters/Chargers for other projects. They would also be excellent and could be used for great projects later. 1 of mine will be used to power a wheelchair lift for quick trips and the other will be for my Bluetooth Boombox I am building. http://www.ebay.com/itm/like/321828687880?ul_noapp=true&chn=ps&lpid=82
Look into Adafruit options and you can get ideas on powering mobile/wearable LEDs.
tmarshal61 wrote:I think I would use a 12V battery, (like a car battery, or a golf cart battery), or better yet, power it off of the 12v Source from what ever is powering the float.The PI runs off of 5v, so, you will need a Buck converter to step from 12v to 5v for the PI. If you use 12V pixels, you can run them directly off of the 12 V battery with no step-down. If you are using 5v pixels, just power the lights and the PI off of the output of the buck converter.
Something like this:
http://www.amazon.com/Waterproof-Converter-Regulator-Adjuster-Surveillance/dp/B00CEP3A0Q/ref=sr_1_1?ie=UTF8&qid=1455568909&sr=8-1&keywords=5V+waterproof+buck+converter+50W
Thanks for the suggestion but this isn't a typical Margi Gras float, it's just a small red wagon for a school parade so using a car battery is not really an option as I'll need something more lightweight.
Thanks kychristmas for the suggestion. I'm thinking of using the pi since that's what I have and know but by the time Mardi Gras rolls around next year, I may choose something else if my pi is being used.
I'm thinking it will only be 50 lights really but I haven't sat down and figured anything yet as I wanted to see how to figure out the portable power requirement part first before I get too deep into this. Good thing is I only need power for 30 minutes as most so I don't need anything long lasting.
This whole computing how much power you need part confuses me and is why I ended up studying software development in college instead of electrical engineering.
