Notifications
Clear all

Phidget SSR

20 Posts
7 Users
0 Reactions
26.1 K Views
Posts: 232
 JCB
Topic starter
(@jcb)
Reputable Member
Joined: 17 years ago
[#57468]

Does anyone have experience with these solid state relays?
https://www.phidgets.com/?prodid=1155


19 Replies
Braveit1
Posts: 577
(@braveit1)
Honorable Member
Joined: 19 years ago

Ah, brings back memories of my first homemade 8 channel controller built using a PC Parallel port and these hockey puck style solid state relays. These are not dimmable, just an on/of setting. The hobby sure has grown since using these.....


Reply
Posts: 232
 JCB
Topic starter
(@jcb)
Reputable Member
Joined: 17 years ago

The specification indicates they are random turn on so I would think these would be dimmable. These are the cheapest hockey puck random turn on relays that I have found but they are still pricey. I am wondering if they would perform better / more realiably than SSREz type relays that I currently using.


Reply
Braveit1
Posts: 577
(@braveit1)
Honorable Member
Joined: 19 years ago

I could be wrong but I believe the random part of the SSR is for when the SSR switches on and off according to the type of load applied and when the triggering voltage is present. For a motor or servo with an inductive load, you would use a random turn-on SSR like these as they switch on immediately after the circuit opens. When you are turning on and off LED with a resistive load, you use a SSR with a zero-cross turn-on as they switch on and off once the current hits a zero value. Zero-crossing relays don't always turn off inductive loads very well. I don't think this is what you are looking for in terms of dimming LEDs. The circuit is still either on or off, just at what voltage and when it is tripped. But I understand your though as it opens/closes as the voltage is increasing / decreasing, which could, in effect, look like a ramp up/down. You just can't control that ramp voltage.


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago
JCB wrote:
The specification indicates they are random turn on so I would think these would be dimmable. These are the cheapest hockey puck random turn on relays that I have found but they are still pricey. I am wondering if they would perform better / more realiably than SSREz type relays that I currently using.

What kind of performance/reliability issues are you having? As far as I know you shouldn't be having any issues.


Reply
Page 1 / 4
Share: