I usually just do things for Halloween, but I have used some of those props for Christmas as well.
Here are a couple of my crossover animatronic projects:
Here's a Parody of "Up on a Housetop"
https://www.youtube.com/watch?v=4ZpXTV1Jsvs
And this one is a parody of "White Christmas"
https://www.youtube.com/watch?v=yKEfPTvumBQ
You can see all the videos I have done with this set of life-sized animatronic characters here:
https://www.youtube.com/playlist?list=PLZdCIZv81Evuks5h0rv_2a1xVWiWx5XMW
Do you have any videos / pictures of the build of these? Servos? What type of controllers?
Yes, I do. I'll give you something to look over for a bit here: My 3 axis skull build That starts at the very beginning with my first design where I documented every step of the process with pictures, explanations, templates, and the whole works.
I later created a new design that I used, and up until now are still using on the set of skeletons that you see in those videos. The proof of concept prototype for that skull is here: https://www.youtube.com/watch?v=TIjkcSjkDek .
Later, that design got refined, and ended up looking like there:
Here is a video that shows how the moving arms work:
https://www.youtube.com/edit?o=U&video_id=yo4DG99Ugkc
I have been busy redesigning everything again, and plan to replace all the heads, and some of the sets of arms this year. I started a company ( https://halloweenskulls.com ) where I make 3D printed skulls using my animatronic designs, and this year I will be adding updated moving arms with much better hidden servos and wires.
Finally, this is a video made from the CAD files for my new skull design. All of the parts have since been revised again, but you can see the idea with this video: https://www.youtube.com/watch?v=kSyNl01DuX0
I didn't answer all your questions in the above post. I use all servos and use ones from HiTec. Just a personal preference. Some are very powerful like the ones used on the arms at the shoulder which are these: https://www.servocity.com/hs-7980th-servo
Most are the standard servos.
I use a DMX controller for all of them. There are about 45 servos in my setup. The controller I have been using is one made by Skulltronix, but this year, I have made my own DMX servo controller card.
This is what my new skull looks like in action. This is the 3D printed 3 Axis Animatronic skull that I will be replacing the old ones with soon:
https://www.youtube.com/watch?v=M4zi8xhmkwo




