My next door neighbor wants to do "blinky/flashy" this year. He would like to use the same music broadcast as I use. We would have only my transmitter.
He would like to have the "fun" of sequencing his own show. How can I accomplish this?
I can connect to his house with cat5 for a hard hook up.
Any help, as always, is appreciated.
Setup up a profile that has both displays. Create each sequence and copy them. Let him take the profile and sequences to sequence his portion, of each song and you sequence your portion. When you are done, copy his sequences (either manual copy and paste or using the tools/copy even sequence data function) into yours. Then your computer runs everything.
Hopefully that is clear.
Edit: Kelly beat me to it, but here's what I did this last year... it's exactly what Kelly described.
I assigned a range of channels to a neighbor this last year, and I gave him a copy of my sequences and music. I colored his channels differently (dark brown) so he could easily find them in the channel listing. I showed him how to paint them, how to ramp up/down, etc. and let him go with it. I gave him a flash drive and told him when he was done to make a copy of the sequences folder on the flash drive and stick it in my mailbox.
I renamed them slightly on the flash drive so I could tell his from mine, and then copied them into the sequences folder. I opened up two instances of Vixen and loaded my sequence into one, and his corresponding sequence into the other. Then I simply copied his channels (highlight, CTRL-C) and pasted them into mine over the channels I had reserved for him.
I set him up with a wireless controller (you could do the same with a wired controller) and ran the show from my house. It worked slick -- he got his blinky-flashy, he got to do all the sequencing work, his kids hung the lights, and I ran the whole thing including the FM transmitter.
A couple days later, a few serious family health issues put the kybosh in the deal and they pulled the plug -- on the lights, not on him -- because they were gone so much.
But the point is that it worked quite well.
Our neighborhood is built around a couple mid size lakes. I light my 17' sailboat and run a waterproof cable. This year I am going to add the boat with wireless and try to bring some of the neighbors into the show.
Thats a good idea getting them to do their part of the sequence. I do good on the hardware, but can use help on the artist side.
Last Christmas, we were gone south. I left my stuff running automatic. My computer lives in a "Hut" I drag down by the lake. I have it on a battery backup. However, it rained 10" in 3 days. The lake rose about 5' which was about 3" too high. Computers don't do well under water! Especially with a battery backup to make sure they stay powered up. Fortunately, I didn't float the boat last Christmas. I think I am adding a highwater switch this Christmas.
xMark
mlyons1957 wrote:I think I am adding a highwater switch this Christmas.
xMark
Now THERE's a sentence I never thought I'd read involving Christmas lights!!! 😆

