The routines function is pretty helpful, but only if you make several variations of each function. For example, you can make a megatree spin that takes 2 seconds, but if a song is playing where you need it over 3 seconds, the original function won't work because there's no "stretch" function in Vixen. Nor is there a "shrink" function, either.
The solution is to make several routines. Make one for a 1 second spin clockwise, another for a 1 second spin counter-clockwise, make a couple for 2 seconds, 3 seconds, 4 seconds, then do the half-seconds, such as 1-1/2 seconds, 2-1/2 seconds, etc. saving them with appropriate names so you can remember them. Then you can look at your timing marks in the current song, evaluate how much time you want to fill with a spin, and load in the one that's closest to the time you need.
Need to do a full house wipe like Holdman does? Save it as a routine and load it as needed. Sweet.
After a while you'll find lots of reusable routines and saving them with different timings really does aid the speed with which you can sequence a selection.
Sounds like a stretch and shrink feature would be a great feature also for Vixen...hmmmmm..
No input yet?
I think nobody knew about this feature! I was simply using copy/paste for similar functionality, albeit much more time consuming and cumbersome.
Just when you think you know what you are doing someone points out a easier way to do it.
Thanks for the tip.
Jerry
