RDS Encoder
 
Notifications
Clear all

RDS Encoder

6 Posts
3 Users
0 Reactions
4,451 Views
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
[#549]

I ordered a 1000mW FM transmitter with a RDS daughter board from PCS:
http://www.pcs-electronics.com/2007-stereo-transmitter-card-p-968.html

This model only transmits one message but I was able to attach a RS-232 cable to the MICRO MAX RM-1 and use the Micro Max Software to send the data to the RDS board:
http://www.pcs-electronics.com/software/Manuals/manual_MicroMax_RT1_en.pdf

I am having the Vixen Launcher execute a file (different file for each song) to update the data.txt file so the encoder displays the song artist and title. It took a bit of fooling around with the software to get it to work right. It is not flawless but it does work.

I have requested that KC revise the launcher plugin so it will launch .bat files, I had to make .exe files to make mine work since the launcher only runs .exe files.

If you order one, be sure to pay for Fedex delivery because it can take months to get otherwise.

The PCI MAX 2007 software also controls the output power of the transmitter so you will not have the FCC knocking on your door (if you worry about such things).


5 Replies
Posts: 292
(@jaysonh)
Reputable Member
Joined: 19 years ago
FireGod wrote:I ordered a 1000mW FM transmitter with a RDS daughter board from PCS:
http://www.pcs-electronics.com/2007-stereo-transmitter-card-p-968.html

This model only transmits one message but I was able to attach a RS-232 cable to the MICRO MAX RM-1 and use the Micro Max Software to send the data to the RDS board:
http://www.pcs-electronics.com/software/Manuals/manual_MicroMax_RT1_en.pdf

I am having the Vixen Launcher execute a file (different file for each song) to update the data.txt file so the encoder displays the song artist and title. It took a bit of fooling around with the software to get it to work right. It is not flawless but it does work.

I have requested that KC revise the launcher plugin so it will launch .bat files, I had to make .exe files to make mine work since the launcher only runs .exe files.

If you order one, be sure to pay for Fedex delivery because it can take months to get otherwise.

The PCI MAX 2007 software also controls the output power of the transmitter so you will not have the FCC knocking on your door (if you worry about such things).

I would request that Vixen not spawn batch files as it takes more overhead (or atleast did when I was actively programming) than an .exe file.

Also the FCC can be a real concern to some. For instance in Florida and Virginia, it is a Felony to run an unlicensed radio station whos field strength (you cannot go by output wattage alone) exceeds the maximum limits. Just a fyi for ya bro, I'd hate to see your show short lived due to any complications.


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago

I am requesting that Vixen run BOTH batch and exe files. In order to change the RDS data file, it MUST be over written (updated) and a batch file is by for the easiest way for any DIYer to do. Most DIYers don't have a way to write and complile their own exe files.

The FCC is not going to bother you as long as you don't interfere with a licenced radio station. As I stated, the transmitter power is adjustable via the software. The Ramsey FM25B (which most guys use) has a power adjustment but it is inside the case and is capable of the same power output as the PCIMAX 2007. If you are that concerened about the wattage adjustment, just order their low power unit.


Reply
Posts: 125
(@bonuts)
Estimable Member
Joined: 19 years ago

not trying to get into the vixen .bat support versus not debate, but just thought I'd mention checking out autohotkey as a great (and easy) scripting altervative that has easy .exe creation built in.. http://www.autohotkey.com/


Reply
Posts: 292
(@jaysonh)
Reputable Member
Joined: 19 years ago
FireGod wrote:I am requesting that Vixen run BOTH batch and exe files. In order to change the RDS data file, it MUST be over written (updated) and a batch file is by for the easiest way for any DIYer to do. Most DIYers don't have a way to write and complile their own exe files.

The FCC is not going to bother you as long as you don't interfere with a licenced radio station. As I stated, the transmitter power is adjustable via the software. The Ramsey FM25B (which most guys use) has a power adjustment but it is inside the case and is capable of the same power output as the PCIMAX 2007. If you are that concerened about the wattage adjustment, just order their low power unit.

Was just a general warning as I did not interfere with any radio stations when I ran my 100w station years ago in fact I had low pass filters installed as well and was probably cleaner signal wise than the local high school's radio station. But that didnt stop me from getting a letter.

Power is not everything bro, you need a way to check your field strength as well as that is checked as well. Trust me, I've been through it twice.

There is a utility that will convert a batch file to an exe file, and I can easily create an exe file to create/overwrite (ie. same file name) a batch file as well let alone whatever else so long as it's just a small Win32/DOS type of program. I'd just hate to see Vixen create anymore overhead than it (or any other program) does. I dont have the source nor did I ever look to see what it was created with though, so, spawning a batch file may not be a problem (ie. may not increase overhead).

Not arguing with ya man, none of my reply was supposed to be, didnt wish to appear nippy, sorry.


Reply
Page 1 / 2
Share: