Lexan Pipe Mounts
 
Notifications
Clear all

Lexan Pipe Mounts

28 Posts
16 Users
0 Reactions
24.3 K Views
Posts: 3735
Topic starter
(@algerdes)
Famed Member
Joined: 15 years ago
[#45202]

I believe that the product has been on the market now for a while.
With that in mind, I would like to know if anyone has used the "Lexan Pipe Mount" that HolidayCoro sells, and if so, how are they doing.

The product can be found at https://www.holidaycoro.com/Half-Inch-Lexan-Pipe-Mounting-Clip-p/770.htm .

I've been unable to find this product anywhere else.

Thanks for any information you can send my way.

Al


27 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I just cut 3/4" PVC to 2"+ length then cut off top 1/3( - or +) of the round.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I've not used the clear ones, but their white ones are POS. Over half of them have broken. When I went to the web to look for replacements, I had luck searching for 20mm PVC Pipe Clip


Reply
Posts: 26
(@tnf250)
Eminent Member
Joined: 12 years ago

I used the clear ones last year. Did have any issues, no broken ones when removing the lights and I was NOT gentle. I did leave them up so we will see how they hold up throughout the year for this coming Christmas.


Reply
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago
mrGrumpy wrote:I just cut 3/4" PVC to 2"+ length then cut off top 1/3( - or +) of the round.

This is exactly what I did as well....Except or me I used 1" conduit and cut the top 1/3 off and used a step drill bit to drill 2 holes and mounted. The 3/4" conduit snaps into place and keeps it there nice and snug. I have used this for 3 years on a 12 strip ray tree and no issues whatsoever.


Reply
Page 1 / 6
Share: