Notifications
Clear all

Wiring

4 Posts
4 Users
0 Reactions
1,910 Views
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago
[#58256]

I have a mini amplifier with an AC adapter that outputs 12V-5A. Can I cut off the plug and wire that with a fuse to my 12V mean well power supply? I am trying to avoid needing the additional power plug. Is there a better way to handle this?

Here is what I’m working with.


3 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

In principle, it should work. The possible issue is noise on the 12v line caused by the pixels and other devices. Adding a coil and two capacitors at the amplifier input would fix the issue. Note: This is a possible issue. You would need to try without the filtering circuit first.


Reply
Posts: 3
(@spoofy)
Active Member
Joined: 2 years ago

did this work for you? i'm considering doing the same thing


Reply
Posts: 3
(@spoofy)
Active Member
Joined: 2 years ago

well in case anyone is curious, i tested this today and so far nothing has exploded or caught fire. audio works fine.


Reply
Share: