I have 9 fake minitrees with multicolor incands on them. I use 9 dmx channels to control each of the minitrees independently. they look great and give me a nice chase effect but I now want to convert them to be able to be either red, green or white, separately or at the same time.
Staying conventional with incands would mean tripling the number of lights on the trees, tripling the number of channels and requiring adding 2 more controllers (I use lynx express) and lots of more extension cords...so I am thinking using pixels instead, maybe 24 per mini tree. My question is what kind of controller should I consider to control those 9 minitrees (and nothing else)?
My display is very simple, I only have 4 lynx express (64 channels), a handful of Pixel flood lights (holiday coro) and 1 X 127 pixel controller for two stars and 1 arch... all driven from a lynx dongle.
Thanks in advance for any suggestions you may have.
So, If i understanding you right
9 minitrees x 24 pixels/tree = 216 pixels total?
unless the minitrees are really small, I think you may end up wanting more than 24 pixels/tree..... more like 50.
How far apart are these trees?
I would think you could get away with a 4-output controller like a alphapix4 or a sandevices e6804 or even a f4b (falcon + bbb).
You are correct, 9 minitrees, 216 pixels, 648 channels.
The minitrees are "walkway pre-lit Christmas trees" and very small. I hope 24 pixels will actually fit...
I line them up along the walkway and they are 5-6 ft apart from each other.
Since almost all the 512 channels with my current dongle are already used, how the suggested controllers would have to be setup/wired up?
I always recommend the E682 as a starter pixel controller. It has 16 outputs for future expansion. Will control more different types of pixels than other controllers. And you will always be able to use it in your show.
At this point, I would recommend the Falcon F16v2 - it's as easy to setup as the E682, uses the same connections/connectors as the E682, is about the same size as the E682 but can be expanded from 16 ports to 32 ports with a simple ribbon cable and supports up to 64 universe. I have both and would easily recommend both as well but if I had to choose, I would go with the Falcon. The price is roughly the same as well.
