What Controller to ...
 
Notifications
Clear all

What Controller to Use?

12 Posts
8 Users
0 Reactions
6,630 Views
Posts: 99
Topic starter
(@kingjesse2)
Estimable Member
Joined: 11 years ago
[#54459]

Hey Everyone,

I have more of an opinion question for you all. I currently have a F16V3 controlling my mega tree and all of the output RCVR ports used to output LOR to some controllers. The expansion board ribbon slots are empty. I want to run more LED strings and elements from elsewhere around the front of my house (up to 50 feet away), and need to control them. Do I:

1) Buy a Falcon differential expansion board for the F16V3, and use Smart Receivers near the elements

2) Buy a Falcon F48V4 Differential Controller to future-proof myself and use Smart Receivers

3) Use some other brand/type of wired controller (Don't need to go wireless, introduces extra variables).

Thanks everyone!

(Oh and if it matters at all, I'm using Vixen)


11 Replies
Posts: 49
(@palussa)
Trusted Member
Joined: 7 years ago

I would buy what you can get your hands on. I know there were some delays with some orders. I had to wait 3 weeks or so for my expansion boards from falcon.

Sent from my iPhone using Tapatalk


Reply
jem5136
Posts: 306
(@jem5136)
Reputable Member
Joined: 17 years ago

Both options would achieve what you're looking to do without any issues, however, I would recommend getting yourself an F48, especially if you plan on expanding in the future. I can tell you from experience nothing is worst than wanting to add props but you're short a controller or two. Make the investment now and you'll thank yourself later.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I would get the F48. In my case I have used an additional F16 in such a situation. I have five F16s set up in an overlapping pattern so if one goes out I can shift the props to nearby controllers.


Reply
Posts: 36
(@maraku)
Eminent Member
Joined: 6 years ago
kingjesse2 wrote:Hey Everyone,

I have more of an opinion question for you all. I currently have a F16V3 controlling my mega tree and all of the output RCVR ports used to output LOR to some controllers. The expansion board ribbon slots are empty.
1) Buy a Falcon differential expansion board for the F16V3, and use Smart Receivers near the elements

If you had the F16v4 this would be a bit different.
Depending on how many pixels are already on your F16v3 controller, it might be worth while buying another one.

'Banking' on the F16v3 and F48v3 is an annoying part of them, I'm glad the v4's solve this issue!

For a video explaining banking:

If you know you're not going to come to these limitations then buy the expansion board by all means.


Reply
Page 1 / 3
Share: