vixen3 E682 GECE ne...
 
Notifications
Clear all

vixen3 E682 GECE need help

10 Posts
2 Users
0 Reactions
3,947 Views
Posts: 890
Topic starter
(@ben-bobbi)
Noble Member
Joined: 17 years ago
[#31423]

I have tested all 6 settings on the E682, i get correct color output after adjusting to BGR settings on sandevice webpage. When i try to run through vixen3, pixel 1 off, only next 4 pixels nothing. They run through very faint color through white. I tried running a nutcracker effect. This is the best i have been able to get, so i need help! Here are some screen shots.

display config

config setup

9 Replies
Posts: 890
Topic starter
(@ben-bobbi)
Noble Member
Joined: 17 years ago
sandevices1
sandevices2

Reply
Posts: 339
(@dan-ross)
Reputable Member
Joined: 19 years ago

First thing I see is in Vixen you need to have 3 682 channels for each pixel and the use the patching tool to assign say arch 1 to E682 1, 2 and 3. Also your channel count in your universe setup should equal your pixel count times 3 so if you have 49 pixels you should have 147 channels


Reply
Posts: 339
(@dan-ross)
Reputable Member
Joined: 19 years ago

Also do you have 1 string of 49 pixels or do you have multiple stings connected to the 682?


Reply
Posts: 890
Topic starter
(@ben-bobbi)
Noble Member
Joined: 17 years ago

If i try to patch pixel arch, arch-1 to E682-1 #1 & #2 & #3, this is what i get. I will fix the channel count tonight and see what that does.

wrong way

Reply
Page 1 / 2
Share: