RGB 2811 orange?
 
Notifications
Clear all

RGB 2811 orange?

11 Posts
5 Users
0 Reactions
4,489 Views
Posts: 27
Topic starter
(@adamz)
Eminent Member
Joined: 11 years ago
[#41156]

I got some strings of 50 2811 RGB pixels from holiday coro. ive been doing some testing and when i try to make the color orange, its more of a yellow almost white. I have not yet done a burn in on these strips. will the orange get more vibrant similar to this: http://www.holidaycoro.com/RGB-Singing-Pumpkin-Face-p/17rgb.htm or would I need some other type of RGB strips to get a bright orange? my first year, im still learning.


10 Replies
Helenaguy
Posts: 255
(@helenaguy)
Reputable Member
Joined: 17 years ago

Sounds like you have too much intensity on the green. I think I get the best orange (IMHO) at around 192 red and 23 green for pixabulbs. I'm sure every led is going to be a bit different in the "ideal" balance for a pleasing orange.

If you are using nutcracker, try using the test feature and chose the RGB tab, then select background only, then use the sliders to "play" with the combinations until you get what you are looking for. I'm sure you can get it the way you want it.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I use something like 64,8,0 or 64 16 0. I find that brightness needs to overall pretty low for orange to look right.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 27
Topic starter
(@adamz)
Eminent Member
Joined: 11 years ago

Thanks for advice. I will check it out. I am using xlights. Mainly need orange for Halloween, pumpkins and all


Reply
Posts: 27
Topic starter
(@adamz)
Eminent Member
Joined: 11 years ago

Thanks helenaguy 192 and 23 were just what I was looking for. im also trying to get a rich purple so far 75 red 0 green and 75 blue have been as close as i can get. any ideas for purple?


Reply
Posts: 207
(@onewish1)
Estimable Member
Joined: 14 years ago

I will look at the settings when i get home.. for the 2801 I set.. it looked better on the 2811

Sent from my SM-G900V using Tapatalk


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

There is either a thread somewhere on one of the forums or on the xlights fb page where everyone posts their favorite color codes....if I run across it i'll post the link


Reply
Posts: 27
Topic starter
(@adamz)
Eminent Member
Joined: 11 years ago

thanks didjareally. there is a lot of information out there. its hard to keep track of everything.

white, red, green and blue are the easy colors. orange was tough, purple and yellow are also tough. light blue and pink are just blends of other colors and were quite easy to figure out.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I do purple similar to orange. Very low numbers. Something like 4,0,32.
Keep in mind that bit all colors can be mixed with just the RGB primaries. Take a look at this image.

The horseshoe represents the full gamut of human vision. The triangle represents the colors that typical RGB sources can mix to create. This particular image is the sRGB color space. The actual color coordinates for each individual LED light sources will vary somewhat by brand and manufacturing quality.
You'll notice that the most vibrant oranges and lime greens and cyan colors lie outside of the RGB triangle. You'll never get there with standard RGB primaries. The best you'll get is the closest spot on the outer edge of the triangle.
Some of the more expensive led fixtures use more than 3 primaries to expand the gamut. The ETC selador fixtures use 7 colored LEDs. These include cyan, lime, amber and another that I forget at the moment.
The Philips hue bulbs also use a similar nonstandard mixing technique. Though with only 3 colors. Their 3 colors are different than the standard RGB to give a more specific mix of colors tailored toward indoor lighting.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Helenaguy
Posts: 255
(@helenaguy)
Reputable Member
Joined: 17 years ago
AdamZ wrote:Thanks helenaguy 192 and 23 were just what I was looking for. im also trying to get a rich purple so far 75 red 0 green and 75 blue have been as close as i can get. any ideas for purple?

Sorry Adam, I kind of lost track of this thread. Glad I could help on the orange. Purple is one I have struggled with as well. As Jon points out below, richer color by smaller amounts of red and blue, but I haven't had much luck getting a bright purple. It washes out. I've had pretty good results just using one of the "stock" purples (predefined colors) in Nutcracker though. It seems washed out inside but appears more saturated outside in the dark.

Ben


Reply
Page 1 / 2
Share: