Random flickering
 
Notifications
Clear all

Random flickering

27 Posts
4 Users
0 Reactions
5,739 Views
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
mrGrumpy wrote:Oh, wow. Have you tried re-flashing the ESP's
Maybe another test. Set Pixel Pop to "1" pixel.

Ok I switched back to 1 universe and 50 pixels and now I have no random anything all lights seem to be off again , this is weird

Sent from my iPhone using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
wilmar wrote:FPP on pi not even connected and vixen is closed and no other pixel pops are connected

Sent from my iPhone using Tapatalk

That isolates it down to the Pixel Pop or ESP. Pixel Pop has little to go wrong, and if you say this is happening on several, that tell me it is most likely the ESP. Do you have any ESP's that work correctly?


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
mrGrumpy wrote:That isolates it down to the Pixel Pop or ESP. Pixel Pop has little to go wrong, and if you say this is happening on several, that tell me it is most likely the ESP. Do you have any ESP's that work correctly?

All 15 esp are new only tested few times and flashed a week or 2 ago with latest I can try a few others to see what’s up

Sent from my iPhone using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
wilmar wrote:Ok I switched back to 1 universe and 50 pixels and now I have no random anything all lights seem to be off again , this is weird

Maybe the saving pixel count changed things . . . Lets hope it stays away.


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
mrGrumpy wrote:Maybe the saving pixel count changed things . . . Lets hope it stays away.

Yes thank you !

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
angus40 wrote:There is a simple way to test with the 12v setup

Only connect your pixel strings data and V- to the e682 .

Connect your pixel strings V+ to a 5v power supply's v+ . then connect the 5v power supply v- to the 12v power supply v- .

Just be certain of these connections before applying power .

Thank you aswell !

Sent from my iPhone using Tapatalk


Reply
Posts: 91
(@dennismc)
Estimable Member
Joined: 13 years ago

Are you running XLights or Vixen with output to lights turned on?

Sent from my SM-N976U using Tapatalk


Reply
Page 3 / 3
Share: