Pixel Strip / Ribbo...
 
Notifications
Clear all

Pixel Strip / Ribbon Question

6 Posts
5 Users
0 Reactions
2,408 Views
Posts: 12
Topic starter
(@aschaffer)
Eminent Member
Joined: 9 years ago
[#48582]

I am having a hard time finding any discussion on what the real differences are between the Pixel strips I find from LOR, HolidayCoro, WowLights and DIYLEDExpress. All have significant differences in cost, yet all seem to have the same specs. 5m length, 12V, 30 LED/m, 10 pixels/m, 120degree viewing angle. Can anyone shine some light to this subject for me, or are they all the same thing just packaged and sold by different vendors?

Thanks!


5 Replies
Posts: 335
(@cdanna77)
Reputable Member
Joined: 12 years ago

Usually the pigtail ends are different from vendor to vendor and customer services. Some are more plug n play and others more DIY
Otherwise from my understanding they are all the same pixels.


Reply
Posts: 192
(@rdj6107)
Estimable Member
Joined: 11 years ago

big difference in strip, is whether you do 30/10 or 60/20. many use 30/10 and are satisfied with the brightness and look. 60/20 offers you more pixels making it brighter. many have gone away from using it as an outline on their houses because of their fragile nature. i would venture to guess that unless you are using the boscoyo pixel wreaths, that any arches you see whether its pex or hdpe, will use strip. and you have those few die-harders that like the look of the strip to build a megatree. other than arches, be sure to affix the strip to something rigid, i.e pvc or emt. it will help their longevity. and to your original question, there is no difference between vendors other than cost.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

There are also 30/30 (aka 1:1 - each LED is a pixel) and 60/60 strips using WS2812b pixels. I have removed most of these from my show due to quality issues. The biggest problem seems to be the devices separating from the strips. Solder does not flex. This makes any strip subject to long term issues if you are not putting it up and leaving it alone. For the 30/30 and 60/60 strips there is an additional issue in which the chips run hotter, making the solder even less reliable. I personally have far fewer issues with the 30:10 strips than I have with the 30/30 strips.


Reply
Posts: 12
Topic starter
(@aschaffer)
Eminent Member
Joined: 9 years ago

Thanks for the info everyone! This is quite helpful.


Reply
Page 1 / 2
Share: