Pixel Newbie !!!
 
Notifications
Clear all

Pixel Newbie !!!

11 Posts
7 Users
0 Reactions
3,938 Views
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago
[#30281]

I am just starting to explore the possibilities of converting 4 ten foot arches and a 15 foot mega-tree
from incans to pixels. Where is the best place to start, considering I know almost nothing about them or how
to control or sequence them.
I currently use three Renard SS24's and four Renard SS16's All are setup with Dirk's Xbee Snap-in adapter and
I broadcast globally to them with the Start Adress Firmware. I am planning on changing to the Kombee boards
for Christmas 2014. I use Vixen 2.1 now, but am very interested in Vixen + or Vixen 3.
I like the way the RGB's look and the sequences/effects are amazing. I am trying to plan for some expense but
would like to try and keep it reasonable without sacrificing quality. I am sure it will be expensive and that is why
I am trying to learn and plan as soon as possible this year !!
I appreciate everyone who has been so willing to take the time to help me in the past and I have learned a lot !!

Ricky


10 Replies
Posts: 99
(@mazobob)
Estimable Member
Joined: 13 years ago

I'm kind of like you, but I am totally new to the whole xmas lighting thing. Being an IT guy, I have virtually no interest in incandescent lighting. All my desires have to do with pixel lighting. I am going to ease into the expense by playing around with (2) 2811 strips, and (3) 2811 strings. I doubt I will do anything for a display this year, as I just want to get my feet wet. I want to see how much work goes into it, and probably more important, how much money goes into it. I showed my wife a youtube video of a pixel megatree, and she said "you should build one". Neither of us knew the cost, nor the trial and tribulations that will go along with such a hobby. I've been doing a lot of reading, and reading and more reading.

I pulled the trigger on a small purchase just yesterday.
- (2) 5V 2811 pixel strips
- (3) 5V 2811 pixel strings
- (1) 5V 300W power supply
- (1) DC1000 enclosure
- (10) 4 wire pigtails

And since I have a crappy el-cheapo soldering iron, I got a $63 soldering station on amazon...
http://www.amazon.com/dp/B000I30QBW/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1

Kind of makes me regret giving away the oscilloscope I used to own (not that it is needed). I have not played around with electronics in 15 years, and have been working in IT for about that long. I have basically forgotten everything I knew about electronics.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

Lots of great information here and at ausie Christmas forum


Reply
Posts: 251
(@don-gillespie)
Reputable Member
Joined: 13 years ago
Amigorick wrote:I am just starting to explore the possibilities of converting 4 ten foot arches and a 15 foot mega-tree
from incans to pixels. Where is the best place to start, considering I know almost nothing about them or how
to control or sequence them.
I currently use three Renard SS24's and four Renard SS16's All are setup with Dirk's Xbee Snap-in adapter and
I broadcast globally to them with the Start Adress Firmware. I am planning on changing to the Kombee boards
for Christmas 2014. I use Vixen 2.1 now, but am very interested in Vixen + or Vixen 3.
I like the way the RGB's look and the sequences/effects are amazing. I am trying to plan for some expense but
would like to try and keep it reasonable without sacrificing quality. I am sure it will be expensive and that is why
I am trying to learn and plan as soon as possible this year !!
I appreciate everyone who has been so willing to take the time to help me in the past and I have learned a lot !!

Ricky

First off it is Jan 23\14 so you have plenty of time to do what you want. Glad you are starting early, depending what you want to spend my 12 foot pixel tree (180 degrees) complete from start to finish came in around $1800.00. I did not build any pixel arches, however I have arches that are currently strung with incans, if I went the pixel route on my arches, cost would be, another E682 from Jim $180.00 complete plus shipping, WS2811 pixels from Ray on average $20.00 a string for a 50 count, an E1-31 Dmx bridge from Todd roughly $125.00 if you get them now plus shipping, some zip ties and some blood and sweat, ask a lot of questions and order early, do not wait until Oct and then panic, chances of getting help then diminish as everyone is trying to get there display up and running, good luck


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
Don Gillespie wrote:First off it is Jan 23\14 so you have plenty of time to do what you want. Glad you are starting early, depending what you want to spend my 12 foot pixel tree (180 degrees) complete from start to finish came in around $1800.00. I did not build any pixel arches, however I have arches that are currently strung with incans, if I went the pixel route on my arches, cost would be, another E682 from Jim $180.00 complete plus shipping, WS2811 pixels from Ray on average $20.00 a string for a 50 count, an E1-31 Dmx bridge from Todd roughly $125.00 if you get them now plus shipping, some zip ties and some blood and sweat, ask a lot of questions and order early, do not wait until Oct and then panic, chances of getting help then diminish as everyone is trying to get there display up and running, good luck

Hi Don

What would be the requirement for the e1.31dmx bridge in creating and controlling a pixel arch with the e68x .?

I don't see the need there .


Reply
Page 1 / 3
Share: