I feel really silly posting this this but I'm scratching my head on this one.
I have a string of 17 pixels followed by another 40 pixels connected to one port of my E682. The port is set for 57 pixels.
Only the string of 17 pixels function, its like the data dies at the connector. So I pulled the string down, I use Rays 13.5mm plugs, I did a continuity test on the plug, it is fine. I cut off the last pixel thinking its not sending the data, installed a new pigtail (after checking it) and it still will not work. When I check the output end of the 17px strand I have the correct polarity voltage. It just doesn't make sense. I did connect the 40px direct to the port just to test those again and they are fine so its not the 40px string that has the issue. What can I possible be missing? I have soldered hundreds of these before without issue.
I have another string with the same issue I have not pulled down yet.
JCook wrote:I feel really silly posting this this but I'm scratching my head on this one.I have a string of 17 pixels followed by another 40 pixels connected to one port of my E682. The port is set for 57 pixels.
Only the string of 17 pixels function, its like the data dies at the connector. So I pulled the string down, I use Rays 13.5mm plugs, I did a continuity test on the plug, it is fine. I cut off the last pixel thinking its not sending the data, installed a new pigtail (after checking it) and it still will not work. When I check the output end of the 17px strand I have the correct polarity voltage. It just doesn't make sense. I did connect the 40px direct to the port just to test those again and they are fine so its not the 40px string that has the issue. What can I possible be missing? I have soldered hundreds of these before without issue.
I have another string with the same issue I have not pulled down yet.
The followed by is a bit confusing . Is it a string of 57 pixels that are soldered/joined together at the 18th pixel?
Have you verified and saved your settings in the e682 ?
its a vertical string of 17px then a Male/female pigtail connector over to 40px horizontal. yup E682 stuff is right.
I put a sting of 100 on the port and 57px lit so its some weird issue with the string of 17px, can't figure it out
JCook wrote:its a vertical string of 17px then a Male/female pigtail connector over to 40px horizontal. yup E682 stuff is right.I put a sting of 100 on the port and 57px lit so its some weird issue with the string of 17px, can't figure it out
Bypassing the connector with wire would rule out the connector as the issue.
Are the pixels all the same batch or various .
Strange 1 for sure .
angus40 wrote:Are the pixels all the same batch or various .
I have heard of pixels of different ages not playing well together, could that be it?

