I’d like to share a project I have been working on this year to see if this is something people would be interested in for a group buy next year. I originally undertook this project as a personal challenge but realized this may also fill a gap in the DIY community as far as pixel controllers are concerned. All of the new controllers I see coming up (and even most of what is currently available) seem to be moving more toward a commercial product and/or uber-powerful devices that I suspect are overkill for a very large fraction of the community here. I originally found this community seven years ago as an alternative to commercial options available for AC light control to save a bit of money (or once you’ve bought more than a few controllers, a lot of money) and maybe have a little bit more fun (full disclosure: I’m an engineer so being able to assemble my own controllers, build the firmware from source and flash MCU’s and solve a bunch of problems along the way fits this bill but it may not for everyone) so it is unfortunate to me that we don’t have a more DIY/open line of pixel controllers. I suppose pixels are inherently more complicated than AC string lights, and the shows themselves have increased in complexity by orders of magnitude, so maybe spending the money on “commercial” controllers seems logical and easier to justify, but I personally don’t think this is a requirement.
Features
- 16 pixel outputs (or 32 if the clock line is not needed though we would have to double up on power/ground in this scenario)
- Serial output (DMX, Renard, etc): RS485 differential pair
- Full stand-alone capability: On board audio DAC, microSD and real-time clock (with battery back-up)
- Small size: 4”x5” which makes it the smallest 16 channel controller board I am aware of.
- Open source software: To be made available early next year
- ARM Cortex-M7 MCU: Should be enough processing power and memory to meet the theoretical 96 universe and 1024 pixel per output capabilities of the latest competitors. In the real world, it should meet/beat the needs of almost everyone.
- Cost: BOM cost at the 100 unit mark (hopefully a reasonable group buy number) should be about $65 so even with assembly and some other overhead costs, a sub $100 price seems entirely feasible. This would make it significantly less expensive than most other options. For those willing/able to deal with the SMD parts, $65 could be your cost.
Possible additions
- On board display: I’ve gotten along just fine in the past with my E682 which does not have a display but many of the newer controllers do. Maybe I don’t know what I’m missing, but the ability to configure everything over Ethernet and/or with the on-board push-buttons and simple LED feedback has worked perfectly fine for me. Still, I’m thinking I will try to add a header with appropriate signals so it would be easy to add an external display.
- Wireless capability: Like for the on-board display, I have gotten along just fine thus far without it. If the board is used as a stand-alone unit, however, I could see more benefit to this (I have found it very convenient to set-up and test my display running from a Pi w/ FPP wirelessly). Like for the display, this would likely just be the addition of a header to allow use of an external module.
- Additional serial outputs: The board currently only has one serial output mostly because of space constraints but also personal need (if I can output a single stream to run my Renard controllers I'm good). Do people regularly use multiple serial outputs most of the other boards offer? It would be relatively easy to move to a dual driver in an 8 pin package (though we would lose the ability to receive serial…I don’t think any controllers currently do this anyway but it seems to me like this may be limiting for future expansion) and/or go to a SMD part.
Looks like a real nice controller.
I completely echo your thoughts. I too landed here because of the wealth of open development and knowledge. That has definitely fallen quite a bit over the past few years. So it is admirable for you to try and bring that back. I'm still running my 681s on a firmware that I tweaked based on the last open release. And it does what i need better than the release. The ability to tweak and modify to fit a custom use is key in my point of view.
As far as hardware suggestions, id encourage you to take a modular approach. Put the brain on one board and give it headers to feed output boards. Cluster the output headers into smaller groups such as 4 or 8 outputs. This gives you the ability to provide different output boards to suit different needs. You could have standard pixel outputs, differential outputs for pixels or serial outputs. You could even run PWM or triac outputs if you wanted on one of these output modules. I haven't seen that done yet in most pixel controllers.
One of the things that seems to make or break the success of many projects lately is the availability of the boards and kits. So I'd encourage you to have a solid plan to make the kits available for quick ship at all times. One idea you might consider is to use the service offered by elecrow and a few others. They'll stock and sell your design for you. If you're not interested in making a buck off it, this can be a good way to make sure it's available for people.
Sent from my iPhone using Tapatalk
dpitts wrote:Looks like a real nice controller.
That’s quite the compliment coming from the designer of one the aforementioned uber-powerful devices!
jchuchla wrote:I completely echo your thoughts. I too landed here because of the wealth of open development and knowledge. That has definitely fallen quite a bit over the past few years. So it is admirable for you to try and bring that back. I'm still running my 681s on a firmware that I tweaked based on the last open release. And it does what i need better than the release. The ability to tweak and modify to fit a custom use is key in my point of view.As far as hardware suggestions, id encourage you to take a modular approach. Put the brain on one board and give it headers to feed output boards. Cluster the output headers into smaller groups such as 4 or 8 outputs. This gives you the ability to provide different output boards to suit different needs. You could have standard pixel outputs, differential outputs for pixels or serial outputs. You could even run PWM or triac outputs if you wanted on one of these output modules. I haven't seen that done yet in most pixel controllers.
One of the things that seems to make or break the success of many projects lately is the availability of the boards and kits. So I'd encourage you to have a solid plan to make the kits available for quick ship at all times. One idea you might consider is to use the service offered by elecrow and a few others. They'll stock and sell your design for you. If you're not interested in making a buck off it, this can be a good way to make sure it's available for people.
Sent from my iPhone using Tapatalk
It’s interesting you mention the modular approach because some of my early designs idea were actually going this way and like the old AC controllers, I could certainly see this developing into a family of devices. I think I began to steer away from this idea when I realized that a significant portion of the cost/content of the board was in everything except the output drivers and that the difference between 4 and 32 outputs wouldn’t have made much (if any) difference in the MCU I chose. Also, you could always not populate some of the output drivers/connectors but you can never add ones to a board that didn’t have them.
That being said, your idea of making it possible to add differential outputs (as designed, I can do “software controlled” differential pair’s using the data and clock lines of each 16 outputs but doing it though hardware would be better for sure), differing number/combinations of outputs and especially the ability to drive “dumb” devices through TRIAC’s or FET’s (I honestly had not thought of this last one at all but think it is a great idea!) has me really rethinking things.
I will also put some thought into your suggestion of making kits available. Obviously the most cost effective way of doing this will be through the group buy model, but can also appreciate the ability to still get kits outside of a group buy and/or closer to show time will be extremely helpful (I’ve been on this side of things more times than I care to admit).
I did a bit more homework and think I have a better idea of what the cost could be. I've updated the info in the first post.
Love it!
Is the idea with the audio, SD card, and real time clock for it to be the show player too?
My perspective is first year doing this with experience with E682 and Renard SS24.
I can see a desire/need for both Renard and DMX out. So possibly a couple of serial ports.
A display would be nice but not a must have. Adding headers so it could be future add on is cool!
Pushbuttons for testing out RGB nodes at the controller would be a nice to have thing.
I like where you are headed with it. A kit with the Surface mount already in place, and let me solder the through hole is what I would be most comfortable with.
Very cool! Wish I had your talents for hardware design.
Thinking modular/eco system is the right approach.
Kevin
Looks interesting. Perhaps explore a partnership with Dave or the Jim st John. I assembled a e682 and it was one of the highlights of building all this stuff. I enjoy the diy aspect of this hobby.
kreeve wrote:Love it!
Is the idea with the audio, SD card, and real time clock for it to be the show player too?
My perspective is first year doing this with experience with E682 and Renard SS24.
I can see a desire/need for both Renard and DMX out. So possibly a couple of serial ports.
A display would be nice but not a must have. Adding headers so it could be future add on is cool!Pushbuttons for testing out RGB nodes at the controller would be a nice to have thing.
I like where you are headed with it. A kit with the Surface mount already in place, and let me solder the through hole is what I would be most comfortable with.
Very cool! Wish I had your talents for hardware design.
Thinking modular/eco system is the right approach.
Kevin
Yes, this can act as a show player (master) and sACN/E1.31 source. Providing the SMD portion prebuilt and the rest as kit was definitely something I thought of as well and might be a great compromise.
I have just started looking into this scene for the past few weeks and wanted to start out with a few elements I could build for next years holidays. I was really encouraged by the amount of information shared by the community. But then when researching the controllers it was discouraging to see they all had closed and proprietary firmware and designs. It just seemed backwards to everything else about this community. It's also a show stopper for me, personally.
So yes, I'm very interested. I will watch this thread and look for a group buy.

