So I have a ton of pixel strips that were abandoned this year and would like to use them around the house. A few applications for ambient/mood lighting would be behind the bedroom headboard, under cabinet lights, fish tank lights, etc. Are there any standalone controllers that work with 2811 pixels that could do some very mild programmable effects? Maybe something with an RF remote, or maybe Bluetooth with a phone...
Sent from my SAMSUNG-SM-G935A using Tapatalk
They are all over ebay for cheap. Of course you won't be sequencing them with xlights or vixen. Something a bit more work would be a pi. It can drive then with a cheap buffer board you can make for about $5. Make some basic sequences and run the big buttons plug in for fpp. Then u got easy one click mood lights Via your phone.
And you have a usable component for your display in a pinch
I plan to use the junk 5v pixels (converted to all 12v this year) and a pi for the indoor christmas tree. Going to try the pi 3 since it has wifi built in.
There is also shelby's espixelstick. It would drive the strips but then u need something (pi) to tell it what to do.
You might try one of these. You program with your phone
https://www.amazon.com/gp/product/B01LW1J10W/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
I've seen pixels used on the back side of a TV. The controller read the TV signal and whatever color the edges of the screen were the pixels would wall wash those colors on the wall. It was to give the illusion that the TV was larger and 3d.
Go with the pi, FPP and Xlights. Won't be sorry.
