If I were to do a mega tree this year I am confused about something. Say I wanted to buy one of the packages from holiday curo how does that controller interact with Vixen? Does it connect wirelessly through the wifi or do you have to have an open ethernet port on the router to connect it to your network?
We need specific details on the controller . Is it sold as wireless or is it ethernet ? More than likely it is ethernet and requires a ethernet cable either to a router or directly to a PC/laptop's nic . This would be for any sequencer .
For brevity's sake lets say it's an ethernet only controller. I assume then you just address it an IP after you connect it to your router and then can connect that via Vixen or xLights?
The correct question should be:
The two primary ways are Ethernet and serial connections (more recently USB connections). Within Ethernet, you can use wired Ethernet or WiFi Ethernet. Each has pros/cons and depends a lot on the type of controller you plan to use.
The next big piece of information missing in the question is the type of show player. FPP is one major type, an Application running on a desktop computer (aka PC/MAC etc) is another popular type.
RyanB wrote:For brevity's sake lets say it's an ethernet only controller. I assume then you just address it an IP after you connect it to your router and then can connect that via Vixen or xLights?
Yes you assign an IP address to the controller on your network. Then configure the show player to send E1.31 data to the controller using that address.
