I have about 4 espixelsticks connected to a seperate network. Using a NanoStation AP, all my sticks are given static ips and everything is using multicast.
This is my first year of running, and I will see a random issue where the show will freeze. The Falcon PI running on the Raspberry PI continues to play, but the lights never seem to pick backup. The only way I can get them back working is to power cycle them. Any suggestions on tweaks?
I had similar on one of mine.....turned out to be a low power issue. Fix to maintain 5.2v and no more freezing.
mrGrumpy wrote:I had similar on one of mine.....turned out to be a low power issue. Fix to maintain 5.2v and no more freezing.
I've got one element in it's own power supply and own controller and everything is effected at the same time. I'll take some measurements and see if I can figure anything out.
Mine seem to freeze at very end of a sequence, but I could see the red led on the ESP dim a little throughout the sequence.
I had good results last night, after adjusting the power levels on the AP. I'm having some issues with sequence errors, but I have an idea on how to approach that problem.
