Just wanted to see who was getting actual IP address info in the output or jibberish? I have flashed numerous sticks and I always get jibberish. Not sure if it's my programmer or what.
I always got the gibberish. Had to use PuTTY to get the IP address
Sent from my iPhone using Tapatalk
I also get the garbled text after programming but I use either Advanced IP Scanner (Windows) or Fing (Android) network scanners to identify the IP of the ESP module. It shows up with the manufacturer "Esspressif" name as a new device in the scans. I also make a note of the MAC address in order to set a DHCP reservation later in the router.
Sent from my SM-N920W8 using Tapatalk
i have to use putty also.
Kev7274 wrote:Just wanted to see who was getting actual IP address info in the output or jibberish? I have flashed numerous sticks and I always get jibberish. Not sure if it's my programmer or what.
I have flashed maybe 20 ESP's and don't recall having anything but the proper output, including the IP address. But I did have some TTL's that do not do anything....I threw those out a while back, and bought a couple more of the working one.
The one I found to work the best is the "red, 6 pin CP2102, and always shown with a shorting block across pin 4&5 and with a cable. (I've tried the look-alikes but they don't work)
Here is a eBay listing for what I use. http://www.ebay.com/itm/USB-to-TTL-UART-6PIN-Module-Serial-Converter-CP2102-STC-PRGMR-Free-cable-SL-/161927777117?hash=item25b3a5cb5d:g:q~IAAOSw5IJWfJ4I
Even the one at Tayda Electronics didn't work for me.
This may or may not solve your issues.
