E682 Using Light-O-...
 
Notifications
Clear all

E682 Using Light-O-Rama

9 Posts
6 Users
0 Reactions
3,461 Views
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago
[#31052]

Does any one know if the E682 can be used with Light-O-Rama software? And if so do they allow nutcracker effects to be imported?


8 Replies
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Yes and yes. But it is far easier to just use XLights. If you have an existing LOR sequence you can convert it to XLights and go from there, or export from Xlights back to LOR.


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

This is what I did for Christmas 2013. I drove my display with LOR S3 and used the E682 for my RGB arches. Worked like a champ. As far as the sequencing, I setup my RGB effects using NC/XL then imported into LOR. I did find out that NC/XL assigns channel numbers (I had already painstakingly setup in LOR for the visualizer....), so I just dumped my XL/NC effects into a dummy LOR file, copied & pasted them onto my LOR channels. Brute force method, but it worked. I decided to add RGB to this, my first, sequenced display Sept. So I didn't have a lot of time to learn how to do a lot of RGB stuff!!


Reply
Deacon
Posts: 151
(@deacon)
Estimable Member
Joined: 13 years ago

Good info, this is what I'm going to have to do for my display this year. Thanks!


Reply
Posts: 144
Topic starter
(@travisb6989)
Estimable Member
Joined: 14 years ago

thanks for the great info. Now who wants to enlighten me on xlights?
I have never programmed a light show let alone pixels. Am I in for a rude awakening? I'm not really afraid of the "dumb" light string channels however I would like to know it is really that difficult to program pixels?

I am fully aware that is a really open ended question. I just really would like to know what I am getting into.


Reply
Page 1 / 2
Share: