Notifications
Clear all

E682 help

6 Posts
3 Users
0 Reactions
1,734 Views
Posts: 18
Topic starter
(@djnathan1983)
Eminent Member
Joined: 17 years ago
[#43597]

I need some help! Ive got a e682 controller and xlights. Ive got pixels on my roof line, porch line, window and door. The roof has 84 pixels, the porch has 63, window 80 and door 50. How do i program the e682 to use 1-1, 1-2, 1-3, 1-4 for these 4 items? Thanks!

Sent from my iPhone using Tapatalk


5 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

are you running the new firmware or old firmware if you are on old firmware it is a little harder

djnathan1983 wrote:I need some help! Ive got a e682 controller and xlights. Ive got pixels on my roof line, porch line, window and door. The roof has 84 pixels, the porch has 63, window 80 and door 50. How do i program the e682 to use 1-1, 1-2, 1-3, 1-4 for these 4 items? Thanks!

Sent from my iPhone using Tapatalk


Reply
Posts: 18
Topic starter
(@djnathan1983)
Eminent Member
Joined: 17 years ago

Firmware 4.051

Sent from my iPhone using Tapatalk


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

On the setup screen for the e682, the number of strings per port need to be equal to the largest number of strings on any port in that group. In your case, group 1-1 to 1-4 should be set to 84. Xlights will still assign the correct channel numbers to your props.


Reply
Posts: 18
Topic starter
(@djnathan1983)
Eminent Member
Joined: 17 years ago
rstehle wrote:On the setup screen for the e682, the number of strings per port need to be equal to the largest number of strings on any port in that group. In your case, group 1-1 to 1-4 should be set to 84. Xlights will still assign the correct channel numbers to your props.

I put that in and got the roof and porch line working but for some reason cant get the window and door to work right. Only half of the door lights up and the other half is the bottom of the window. Ive got the right channels configured for both.

Sent from my iPhone using Tapatalk


Reply
Posts: 18
Topic starter
(@djnathan1983)
Eminent Member
Joined: 17 years ago

I updated the firmware on the e682 and all is good now! Thank you!

Sent from my iPhone using Tapatalk


Reply
Share: