Notifications
Clear all

Controller

17 Posts
3 Users
0 Reactions
3,565 Views
Posts: 283
Topic starter
(@lamar-bolen)
Reputable Member
Joined: 9 years ago

I cant find anything wrong there all green

Sent from my SM-N960U using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Lamar bolen wrote:How do I see what's not patched

Sent from my SM-N960U using Tapatalk

In the display setup you will see if anything is not patched. Click on an element and where it says patching it will show total patch points, connected and unconnected. The amount of pixels should match how many outputs the controller has. Also, you can see what element is patched where on the controller and visa versa. Select an element and on the left under elements you will see something that looks like a calendar. Click on it and in the controllers window it will show you where the element is patched. The second pic shows I selected Pole Left Star and below you see my mouse arrow. That's what you click on and on the right is the controller showing the outputs it's patched too. The middle window says I have 120 total patch points, 120 connected and 0 unconnected.

Sent from my SM-T710 using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Lamar bolen wrote:I cant find anything wrong there all green

Sent from my SM-N960U using Tapatalk

They may be all green but how many pixels do you have going to the controller? If you have 350 pixels that's 1,050 channels and your controller should match the channel count. In this pic my the number of outputs on the controller is 3,716, 3,716 patched and 0 unpatched.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 283
Topic starter
(@lamar-bolen)
Reputable Member
Joined: 9 years ago

The 3 not green what's it for

Sent from my SM-N960U using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Lamar bolen wrote:The 3 not green what's it for

Sent from my SM-N960U using Tapatalk

Well, if your pixel count is correct and the number of channels is correct then you entered the wrong number of outputs on the controller.

Sent from my SM-T710 using Tapatalk


Reply
Page 2 / 4
Share: