Can A E682 Be Used ...
 
Notifications
Clear all

Can A E682 Be Used Wireless?

25 Posts
11 Users
0 Reactions
7,701 Views
Posts: 187
Topic starter
(@fishking)
Estimable Member
Joined: 12 years ago
[#50269]

I have an E682 I bought a few years back and I'm adding a Raspberry Pi 3. Is it possible to set the E682 to wireless or does it have to have a static connection. I can't find anything in the manual to run it wireless. It is firmware version 4. 51 and PCB version 1.3.


24 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

The e682 has to have a static connection.


Reply
Posts: 187
Topic starter
(@fishking)
Estimable Member
Joined: 12 years ago

Can I run a static connection from the Pi to the E682 and still run wireless on the Pi to access the Pi from my computer in the house?


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The E682 only supports a wired Ethernet connection. With that said, it is possible to get what is called a "Wireless Media Adapter" which connects to your wifi and typically has four CAT5 ethernet connectors to which you can attach devices such as youe E682.


Reply
Posts: 204
(@libby2cm)
Estimable Member
Joined: 14 years ago

If you want to have a flakey/crap show, by all means, use multicast and wifi.

Wired unicast ftw.

Every MS of overhead, latency and jitter matters. Go wired. Ubnt nano switches are $40 a piece, and are made to be used outdoors. I even made passive Poe filters as to not burn my stuff up. Works great.

If you want/need wireless, go komby stack. That guy is a saint in my eyes for the O/S wireless blinky gem of a arduino hw/sw platform he created (with help from others for rfcolor and whatnot), and no one seems to see the value or limitless extensibility of it. My whole Halloween show for example runs wireless rgb floods and wireless fog machines with my own custom hw based on his stuff, all driven thru vixen (or xlights or whatever you want that spews e1.31)

Sent from my Pixel 3 XL using Tapatalk


Reply
Page 1 / 5
Share: