This new feature makes a Renard controller addressable. Go ahead, admit it -- you've wanted it for a long time... and now that your tongue is hanging out, I'm pleased to announce that it's a reality. 
Credit goes to Phil Short for his code artistry and to RavingLunatic for some insightful comments in helping with the documentation, which you will find in the Wiki via the Renard Firmware page or by clicking here:
http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Start_Address_Configuration_Guide
For those of you who are or are soon-to-be Ren-W users, this will be an incredible boost to what you will be able to do wirelessly. In testing, I assembled a nifty 12-controller system simply by broadcasting all channels out from a single Ren-W transmitter; each Ren-W receiver picked up the information and responded only to the channels it was assigned to use. Very slick.
The concept for using it is quite simple, but interested parties are cautioned in the following ways:
1. If you are new to DIY equipment and especially to Renard, get to know how your gear works in normal mode before you jump into this, or confusion is highly likely. Questions are welcomed, but don't expect someone else to figure it all out for you. Remember, this is DIY.
2. The configuration guide probably will answer most questions you might have, so please read it before posting them here. If you find that you do have questions that the guide doesn't address, please post them here or send me a PM. I will try to answer them appropriately and quickly.
The timing is perfect on this new release. I have reviewed the documentation, and yes you are correct, you have to think about what you are doing before you jump in head first. But once you understand the system, it all makes sense. It really make it simple for setting up multi controllers with one global broadcast. This will really help my timing issues over the number of houses we are doing this year.
Thanks to all of you, and a special thanks to Phil, for your hard work and dedication to the wireless world.
Oh and the house count is now up to 14 and may go to 16 by summer.
I like pushing the envelope.
Crap! :p:p:p
Well... Ok... Not really. :D:D
One of the things I want to teach myself is PIC code, and one of the things I wanted to attempt was making REN things addressable. I figured I'd get around to it in the summer (I have a client that is working me full time at the moment). You beat me!
That's OK, I have OTHER ideas 😎
Cool Beans!!:mrgreen: Thanks all!
This will sure help with some Channel layout/ordering problems I've had in the past. It completely changes every year.:(
One thing to note, is the default for this firmware is PWM where the default for the regular firmware is Non-PWM.
I appear to be against the norm, but after using Non-PWM firmware for my incandescents in season 1, then using all PWM for season 2.
Season 3, I went back to Non-PWM, as I'm personally convinced that it made the incandescents look brighter.:rolleyes:
-Craig
Good writeup in the Wiki, DN. My thanks to you and the rest of the team that brought this into being. Always good to have options!
(yet another Don)
