Renard Plus TR-24 P...
 
Notifications
Clear all

Renard Plus TR-24 PIC programming problems

16 Posts
5 Users
0 Reactions
27 K Views
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago
[#49537]

I have never programmed a PIC18F4520 before. I keep getting “Target device was not found (could not detect target voltage VDD). You must connect target device to PICkit 3”. I have used this setup before with PIC16F1825 chips. I changed the jumpers per the board. See pics below. Any ideas?

Sent from my iPhone using Tapatalk


15 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you could program the chip right in the board


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

J2 J3 J4 J5 J6 J7 is that set on 1/2 or 2/3 should all be 2/3


Reply
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago

Not sure. The adapter isn’t labeled. They were all the other direction for the PiC16F1825. So I moved them for this since it said 2-3

Sent from my iPhone using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I am not sure since this has no listing for that chip that is why I suggest putting it back in board and doing it that way


Reply
Page 1 / 4
Share: