PIC Programmer
 
Notifications
Clear all

PIC Programmer

98 Posts
43 Users
0 Reactions
64.9 K Views
Posts: 226
(@chicken)
Reputable Member
Joined: 17 years ago

Mike, First thanks for the great step by step on the PicKit 3. I am new to this whole DIYC thing and it was very helpful. I did run into a problem though and I was hoping you could update the PDF so others do not have the same issue. On steps 9 and 10 the PDF says to go to File then Open and find the HEX file. The problem is MPLABs opens the file but it is not part of the current project so when you select program it is actually programming the firmware in the current project, which if you just opened MPLABs is nothing. So in essence you are blanking your PIC. This has been tested on MPLABs 8.46 and 8.50 (current release). It seems like from your PDF it looks like it was not working in the version you did the PDF with either as you can see the checksum in the screenshot is still 0xffffff. The correct way to open the HEX file is to do a file -> import and then it works correctly. Thanks again for the great step by steps.


Reply
Posts: 502
(@mmulvenna)
Honorable Member
Joined: 19 years ago
chicken wrote:Mike, First thanks for the great step by step on the PicKit 3. I am new to this whole DIYC thing and it was very helpful. I did run into a problem though and I was hoping you could update the PDF so others do not have the same issue. On steps 9 and 10 the PDF says to go to File then Open and find the HEX file. The problem is MPLABs opens the file but it is not part of the current project so when you select program it is actually programming the firmware in the current project, which if you just opened MPLABs is nothing. So in essence you are blanking your PIC. This has been tested on MPLABs 8.46 and 8.50 (current release). It seems like from your PDF it looks like it was not working in the version you did the PDF with either as you can see the checksum in the screenshot is still 0xffffff. The correct way to open the HEX file is to do a file -> import and then it works correctly. Thanks again for the great step by steps.

Hmmm, just did a few the other day for another user using the steps in the PDF. I guess I will have to look at it again. Thanks for the heads up. I will check it.


Reply
Posts: 226
(@chicken)
Reputable Member
Joined: 17 years ago

The telling sign for me was the checksum and doing a blank check on the PICs after I programed them. I am curious if its just a change in the new versions of MPLABs. Thanks again!


Reply
Posts: 502
(@mmulvenna)
Honorable Member
Joined: 19 years ago
chicken wrote:The telling sign for me was the checksum and doing a blank check on the PICs after I programed them. I am curious if its just a change in the new versions of MPLABs. Thanks again!

Just reprogrammed a chip using the steps in the PDF and it worked fine. I am using mplab 8.43. I suspect a change in the MPLAB version is the cause.

EDIT: When I get some spare time I will download a newer version and give it a try.


Reply
Posts: 226
(@chicken)
Reputable Member
Joined: 17 years ago

Sounds good Mike. Thanks


Reply
Page 18 / 20
Share: