LOL "Retarded product of the week award!"
Well, I know NOT to reccommend it for sure now.
Just try and follow the MPLABs vid (as Peter mentioned) it should give you an idea on how to get it going. Also, with the disks that came with the kit, there should be some programming lessons, maybe those can walk you through any issues of setup.
Hope you get it figured out.
mrpackethead wrote:Highly suggest now that you woudl buy a PICKit 3, some great new features and debugging...also very wide support for the new parts.
Okay, so I got the PICKIT III and I cant get it to recognize the PIC16F688 chip. ANy thoughts on what I am doing wrong?
- I have picked PICKIT3 as the programmer.
- Set the options to use to "to power target device from pickit3"
- PIckit3 connects but then gets "Target Device ID (00000000) does not match expected Device ID (00001180)".
- "Configuration Bits set in code" is checked
- I have tried 3 different chips with the same error.
Thanks for any suggestions anyone might have.
It sounds like you might have the pic in either the wrong location or maybe backwards? The only time I've seen that error(with the pickit II) is when I have it wired up wrong.
ctmal wrote:It sounds like you might have the pic in either the wrong location or maybe backwards? The only time I've seen that error(with the pickit II) is when I have it wired up wrong.
Thanks, I double checked my jumper settings and I had one wrong. Moved it to the correct position and I have succeeded in programming the chip. :D:D
Thanks to everyone for the help.
so the question now is how did you do it.
do waynes video's work right with the changes i mentioned, what other changes did you need to make.
the jumpers you mentioned. are they on a programmer board or something. maybe you can take some pics and show so others dont have the same issue.

