Frustrated already ...
 
Notifications
Clear all

Frustrated already problems installing MPLAB v8.70 Getting error 1335...

19 Posts
7 Users
0 Reactions
15.3 K Views
Robo
Posts: 1494
 Robo
Topic starter
(@robo)
Noble Member
Joined: 14 years ago
[#24617]

Just getting into the renard boards and saying farewell to Light o rama controllers. I just recieved my Pickit 2 form Joshua1. But I can't even install the MPLAB IDE software. It gets to the halfway point then I get an error 1335. The cabinet file 'Data1.cab' is corrupt... I did some searching and saw that I should download the v8.89. I found it at this page. But for the life of me I can't figure out how to download it.:whtf:
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en019469&part=SW007002 #"> http://www.microchip.com/Microchip.WWW.SecureSoftwareList/secsoftwaredownload.aspx?device=en019469&lang=en&ReturnURL=http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en019469&part=SW007002#

Very Frustrating since I havent even gotten the software loaded and I have 3 ren 24hc boards and a dmx e1.31 bridge coming in. Also I have sold most of my LOR controllers already so theres really no turning back. :blink:
Desprite for any help. Rob


18 Replies
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago

I think you just click on the link for "MPLAB IDE v8.89" (7th item down on the list). Your browser should prompt you to Open or Save it. I'd suggest Save, then if you quit the install you can re-run it using the local file. You might need to set some security settings for that web site if your browser is locked down.

EDIT: try re-downloading. It's possible that the file got corrupted during the download (which is what error 1335 seems to imply)

Hang in there; it gets easier.

don


Reply
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

I agree that your cab issue probably was a currupt download. You could try re-downloading and see if you have success.

I followed the link you posted and I have no problem downloading the file from that website. It looks like the link is using some scripting to direct you to the actual download file. Make sure you aren't right-clicking and saving target or that you are opening the link in a new window. You need to left-click directly on that link.


Reply
Posts: 909
(@kenoman742)
Prominent Member
Joined: 14 years ago

I had the same problem installing the software. At that time I downloaded ver. 8.86 and it installed with no problems. I am running Windows 7 64 bit.


Reply
Robo
Posts: 1494
 Robo
Topic starter
(@robo)
Noble Member
Joined: 14 years ago

I tried several times to reinstall from the disk. Restarted the computer and still corrupt. Also something else must be going on. The link I provided, if I left click on the download link nothing happens? Is there something im missing?


Reply
Page 1 / 4
Share: