Is there an assembly file readily available for the 16F1825 firmware? I posted on the other site as well hoping that somewhere I can get a quicker response.. I believe the current firmware hex that I am using does no have the channel or triac 3 output defined as 2 different pics channel 3 did not work. Anyone that can help me out I would greatly appreciate it!! Thank you so much!!
Have you tried the firmware on page 3 of the firmware forum on the other site?
Also, I would think that your problem is more likely a hardware issue.
As Phil says, there's other locations for it. Check out this post for information: https://www.doityourselfchristmas.com/forum/index.php?threads/file-library.60601/#post-562320
About halfway down you'll see some links posted by dirknerkle
P. Short wrote:
Have you tried the firmware on page 3 of the firmware forum on the other site?Also, I would think that your problem is more likely a hardware issue.
Hello Phil, I initially thought the same thing but then when I kept having multiple controllers present the same exact problem I realized there is no way all of these could be experiencing this and it be a hardware issue. Turns out it wasn't a hardware issue but was a software issue and my ability to properly put together a silly simple test sequence in vixen. It had put a square block in place at a point that I wanted the lights for the 3rd channel to just be "on" however when the color is not and does not get filled in.. they wont turn on.. after realizing this and correcting it, wabam! all the sudden channel 3 on all controllers started to work! So my own fault.. but glad it was a simple stupid fix at the same time, appreciate you all chiming in to try and assist with this!
How are you doing? I'm a bit surprised to see you working on this after your misadventures earlier this year. Is this for next year, or do you think that you'll have something up this year?
